Installed mine almost 2 years ago and it's been holding up great! Looks OEM and color match is almost perfect.

Sweet! did you drill it? Mine's coming in today, but i'm on the fence about drilling it in or not. A friend of mine is saying its small and has little wind drag, so I don't need to. Buuut I'm still thinking about it... since its a daily driver and all...

I JUST walked in my front door with spoiler in hand lol
Paint looks awesome! I will be putting mine on with the tape only. Of course I will be adding EXTRA 3M tape where I can ;)

NOPE! No drilling. I had the original double sided tape removed and reapplied fresh 3M automotive grade tape. Spoiler is mounted on, looks perfect, and is 100% removable!

at some point this yr. i will be selling my spoiler (oem-mag. red)...let me know if interested...(pm)

Update!
Pics of the sport spoiler installed. Paint is a PERFECT match and the fit is nice too :tup:
Attachment 83394

Attachment 83395

Attachment 83396

Can someone please tell me where to go on this site to order lol i know its a dumb question but frustration is setting in. Do you have to call them?

You cannot order this product from this website. Links are provided in the first post or try searching on eBay :tiphat:

If you're talking about where to order on Wing Tech's site, I would just call or email. They provide both on the Painted Spoilers page.

Great thanks! yea ive been searching around wing techs site to order but Ill call them.

I just got quoted $200 painted and shipped...this seems higher than what most people are saying they got it for. Does anyone know if prices went up?

It did go up. But it was $139 just a few weeks ago. If you search on ebay, there are still people selling them for $140.

EDIT: Scratch that! i just saw their listing. It's still $139 from thespoilercompany on ebay.

awesome thanks! im calling them back

I just looked on their website and noticed they have the nismo version. Anyone try it yet? Also for those that only used tape, how well is holding on? I really dont want to drill

Make sure u order it from their ebay page bc i called them an said i want to order and they said they only do $140 if u order from ebay. Dumb imo

A little over 1 yr my spoiler is still looking and holding on good with just tape. I didn't drill but I did put a little extra 3m that I had when installed.

I put on extra tape also, the strong stuff (20lbs tape), but so strong I couldnt lift it off to adjust it. It was a hair crooked (can't notice until you come up close, look under, near the middle break light. That's what I get for having a "bonding" moment with my nephew.

I park out door and I have noticed it lifting just a small bit on the slightly higher side. Still strong, can't pull it off, but its trapping water in there. Leaks out when I open the hatch. Gonna go nearby to have a professional redo it. $100 was the quote.

D'oh! I lost the screws!:eek:

Anyone know what kind of screws came with it? Gotta have it on hand for the guys when they do the install. Thanks in advance!

For lip spoilers, I never use screws, for "wing" type spoilers, you're going to need to use screws.

Don't use the screws, you'll be fine.

looks sharp and im thinking about ordering. CarID offers the same design at a similar price, but based upon whats been written on this board, im not sure if i want to order from them. would you know if they get their spoilers from the same manufacturer or does Wingtech do it all in-house? bolt on or double-sided tape? much appreciated, and sick ride!

Mine should be in tomorrow. Im debating if i want to use screws as well

Mine shipped today hopefully it's a smooth install.

Installed it today looks great gonna let it sit over night before I drive it. I lined out up about fifty times before I drilled the holes. Everything came out fine.

Has anyone tried their version of the NISMO spoiler?

Bump!

does anyone know if there still selling these? I tried looking on eBay through the link but it won't let me purchase anything.

I got one from ebay a few months ago. It was from the seller advanation, just search "nissan 370Z spoiler" and they should be listed. The fit and color were a perfect match. It was $129.99 shipped

Just ordered it! Thanks for the help :tiphat:

Did you guys do the install on your own or did you take it to a shop?

I just did mine myself. I only did the 3M tape, no screws, and it's on there for good. If you go that route just replace or add to the tape that comes preinstalled on it. I was skeptical of just 3M tape holding but after reading that it worked for other people on here, that thing is like a rock.
Looks like Madmike above got a quote of $100 installed if you decide to go that way.

I got lazy, didn't go to get it drilled. The spoiler is still holding strong with 3M tape. I used the "Super Heavy Duty" or Outdoor, I think they're rated to hold 5 or 10 lbs.

Bought my spoiler a couple days ago. Will update soon

Hi, I want to make sure I have the right link.. can anyone confirm that this is the same wing?

Painted Spoiler for A Nissan 370Z Factory Style Spoiler 2009 2013 Hard Top Only | eBay

Does anyone have a current link to the wing on eBay from wingtech, I did a search and it doesn't seem to come up. Thx

Just wondering which seller you purchased your spoiler from and if you are still happy with it? I am looking to purchase one for mine.. thanks.

installed mine without screws this weekend,

I was a bit skeptical about not screwing it so I went berzerk on the 3M tape!!

http://img11.hostingpics.net/pics/591185wing.jpg

can you post up how it looks. want to see if the tape is visible without drill, whats the thickness of the 3m..

tape isn't noticable at all. Even if it would be, it's black on my black car!!

But anyway here is my pic!

http://img15.hostingpics.net/pics/16...156813730n.jpg

http://img15.hostingpics.net/pics/16...214924062n.jpg

http://img15.hostingpics.net/pics/60...044281383n.jpg

http://img15.hostingpics.net/pics/25...048728901n.jpg

http://img15.hostingpics.net/pics/16...156813730n.jpg
http://img15.hostingpics.net/pics/16...214924062n.jpg
http://img15.hostingpics.net/pics/60...044281383n.jpg
http://img15.hostingpics.net/pics/25...048728901n.jpg

Does anyone have an updated link? Would like to pick one of these up!

DITTO - LINK For A ROADSTER - PLEASE...:bowrofl:

ORDERED MINE TODAY DIRECT FROM WING TECH - DOING THE "NO-DRILL" INSTALL