09-13-2010, 05:24 PM
|
#11 (permalink)
|
|
Track Member
Join Date: Aug 2010
Location: Austin, TX
Posts: 637
Drives: 10 370Z T/S M6
Rep Power: 17
|
Quote:
Originally Posted by AK370Z
That looks really nice. I think I would like to try out the 1 pc cf lip with my cf front fang. (whenever it becomes available)
Question, all the screws goes on the bottom of the bumper right? No drilling on the front of the bumper, am I correct?
|
Yes all screws are on the bottom. 3 on the bottom and 1 in the wheel well on each side... 3 on the underside of the center peice.
There is a lip on the inside of the side pieces near the top to use 3M tape as well as the back side of the center piece. They send 2 rolls of 3M tape along with the screws and that stuff sticks like crazy, but you have to clean the car really good. I forgot to clean 1 side and it didn't stick for ****. I used a bug and tar remover. Safe on clear coat but stripped some of the wax off. Now they are stuck so good, i cant take them off without having to yank pretty hard on it and even then it's very difficult. (had to remove center section to split difference in shortage of length and almost couldn't get it un-stuck)
|
|
|
Similar Threads
1Likes
Threaded Mode
