Need favor from 2010 Z owner...

Osiris · 06-06-2010, 03:53 PM

For those of you owning a 2010 Z with the homelink mirror. All i need is the diameter of the review mirror stem. It's most likely 23mm, but i need to confirm. thank you very much in advance!!

Jeffblue · 06-06-2010, 04:10 PM

i just measured mine its actually 76 mm, maybe i'm wrong. but it was pretty thick. You are talking about the part that you would hang some sort of parking pass on or something right?

Osiris · 06-06-2010, 04:22 PM

yea, the round stem that goes into the back of the actual mirror. You have a touring Z ? Has the homelink buttons and everything? I was 98% sure it should be 23mm, i just wanted to verify....76mm doesn't sound right.

Also, if you look here, this should clarify where the measurement is coming from.

N8GTOL · 06-06-2010, 07:51 PM

Sorry I can't be too much help since I don't have a Z yet, but if it helps I think Jeffblue might be measuring circumference, not diameter.

But if nothing else...free bump.

Osiris · 06-06-2010, 08:36 PM

Quote:

Originally Posted by N8GTOL

Sorry I can't be too much help since I don't have a Z yet, but if it helps I think Jeffblue might be measuring circumference, not diameter.

But if nothing else...free bump.

Always hated geometry! But circumference is what i need. Can anyone confirm Jeffblue's findings?

Lee123 · 06-06-2010, 09:00 PM

Looks like you are correct at 23mm unless they make one that is 22mm. I just measured mine and the dial caliper said about .88 inches which is between 22 and 23. It's an odd angle and that was the best I could do.

SE · 06-07-2010, 12:40 AM

Just measured mine with a gauge. 23mm exactly.

Osiris · 06-07-2010, 12:34 PM

Thanks everyone!!

Daishi · 06-07-2010, 12:54 PM

yea 76mm is way too much thats over 3 inches lol. bigass mirror.. 23mm seems right

Jeffblue · 06-07-2010, 02:00 PM

haha woops i totally measured the circumfrence. my bad.

yea i think a diameter of 76m could support like a 15lb mirror!

06-06-2010, 03:53 PM	#1 (permalink)
Osiris A True Z Fanatic Join Date: Mar 2009 Location: http://www.cfzclub.com/ Posts: 1,524 Drives: Angry Rep Power: 19	Need favor from 2010 Z owner... For those of you owning a 2010 Z with the homelink mirror. All i need is the diameter of the review mirror stem. It's most likely 23mm, but i need to confirm. thank you very much in advance!!

06-06-2010, 04:22 PM	#3 (permalink)
Osiris A True Z Fanatic Join Date: Mar 2009 Location: http://www.cfzclub.com/ Posts: 1,524 Drives: Angry Rep Power: 19	yea, the round stem that goes into the back of the actual mirror. You have a touring Z ? Has the homelink buttons and everything? I was 98% sure it should be 23mm, i just wanted to verify....76mm doesn't sound right. Also, if you look here, this should clarify where the measurement is coming from. Last edited by Osiris; 06-06-2010 at 04:24 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New 2010 PW 370Z owner!!	Posey075	New 370Z Owner	17	06-29-2010 06:36 PM
Can someone do me a favor?	Volcom370Z	Exterior & Interior	10	06-07-2010 10:26 AM
Photoshop favor!	pty370z	Nissan 370Z Photos / Spyshots / Video / Media Gallery	10	10-22-2009 01:04 PM
A favor please!	Pushing_Tin	Nissan 370Z General Discussions	32	07-12-2009 06:13 PM
About to pull the trigger....but need a favor.	tbonesteak	Nissan 370Z General Discussions	13	03-22-2009 10:54 PM

06-06-2010, 04:10 PM	#2 (permalink)
Jeffblue A True Z Fanatic Join Date: Dec 2009 Location: NY Age: 36 Posts: 9,192 Drives: Z32TT & 335xi Coupe Rep Power: 37	i just measured mine its actually 76 mm, maybe i'm wrong. but it was pretty thick. You are talking about the part that you would hang some sort of parking pass on or something right?

06-06-2010, 07:51 PM	#4 (permalink)
N8GTOL Base Member Join Date: May 2010 Location: San Diego Posts: 228 Drives: and flies Rep Power: 21	Sorry I can't be too much help since I don't have a Z yet, but if it helps I think Jeffblue might be measuring circumference, not diameter. But if nothing else...free bump.

06-06-2010, 09:00 PM	#6 (permalink)
Lee123 Base Member Join Date: Apr 2010 Location: Phoenix Posts: 84 Drives: 2010 370Z Roadster Rep Power: 15	Looks like you are correct at 23mm unless they make one that is 22mm. I just measured mine and the dial caliper said about .88 inches which is between 22 and 23. It's an odd angle and that was the best I could do.

06-07-2010, 12:40 AM	#7 (permalink)
SE A True Z Fanatic Join Date: Jan 2010 Location: San Jose, CA Posts: 4,236 Drives: 370z/STI/EVO X/IS-F Rep Power: 23	Just measured mine with a gauge. 23mm exactly.

06-07-2010, 12:34 PM	#8 (permalink)
Osiris A True Z Fanatic Join Date: Mar 2009 Location: http://www.cfzclub.com/ Posts: 1,524 Drives: Angry Rep Power: 19	Thanks everyone!!

06-07-2010, 12:54 PM	#9 (permalink)
Daishi Track Member Join Date: Jul 2009 Location: NJ Posts: 683 Drives: 09 370z 6Speed Rep Power: 16	yea 76mm is way too much thats over 3 inches lol. bigass mirror.. 23mm seems right

06-07-2010, 02:00 PM	#10 (permalink)
Jeffblue A True Z Fanatic Join Date: Dec 2009 Location: NY Age: 36 Posts: 9,192 Drives: Z32TT & 335xi Coupe Rep Power: 37	haha woops i totally measured the circumfrence. my bad. yea i think a diameter of 76m could support like a 15lb mirror!