vinyl help please

Calvin · 05-25-2010, 03:43 AM

when vinyling. what brand or type of adhesive spray is good?

thank you!

Modshack · 05-25-2010, 08:07 AM

Quote:

Originally Posted by Calvin

when vinyling. what brand or type of adhesive spray is good?

thank you!

You might want to study up on this. You generally do not use any additional adhesive other than what is on the vinyl already when you remove the backing. Apply wet (liberally), squeegee flat.

Scroll down to the Water/Squeegee technique in this racing strip how-to: http://www.americanmuscle.com/lemans...e-install.html

My only recommendations would be to substitute the working fluid with 1 qt water and 3 to 4 drops of detergent mixed in. Use rubber squeegees instead of plastic paint scrapers shown to avoid scratching the vinyl.

Ztoon · 05-25-2010, 12:34 PM

I prefer to put on dry when applying 3M Di-Noc.
Prep surface prior with rubbing alcohol or any mild cleaning detergent.
Use heat from a hair dryer for better adhesion and fitment.

Calvin · 05-25-2010, 01:22 PM

ahh .
that's what i was thinking the adhesive spray wasnt needed. had to make sure cause i was ordering some 3m premium cast vinyl and there was an option for the spray and i didn't know whether or not it was mandatory hah
thanks guys! xP

kenchan · 05-25-2010, 01:45 PM

all good info. after install, set it out in the sun for a few hours to cure. if cloudy, i subsitute using IR heater...

05-25-2010, 03:43 AM	#1 (permalink)
Calvin A True Z Fanatic Join Date: Aug 2009 Location: Castro Valley, CA Age: 35 Posts: 1,418 Drives: 4GS, R8v10 Rep Power: 19	vinyl help please when vinyling. what brand or type of adhesive spray is good? thank you!

05-25-2010, 12:34 PM	#3 (permalink)
Ztoon Track Member Join Date: Aug 2009 Location: B.C. Posts: 578 Drives: '09 370a7 Rep Power: 26	I prefer to put on dry when applying 3M Di-Noc. Prep surface prior with rubbing alcohol or any mild cleaning detergent. Use heat from a hair dryer for better adhesion and fitment. __________________ Stillen G3\|CBE\|ground kit, F.I. H.F.C., C.F. fangs\|mirrors\|pillars, Hotchkis, SSR Type-F, RE-11, UpRev, BC BR coilovers 15% tint, LED black hdlts, color match handles, Dynamat, tail lt. tint, Mines C.F. frt. lip\|rear spoiler, Amuse rear,skirts, vented fenders, c.f. vented hood, gloss blk. roof

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
3m Ni Doc carbon fiber vinyl	k's 370z	Exterior & Interior	329	06-12-2014 07:29 PM
Vinyl Wrap - Flat or Glossy	nextbesthing	Nissan 370Z General Discussions	10	12-08-2011 01:50 PM
Vinyl wraps	Calvin	Exterior & Interior	4	05-23-2010 06:06 PM
Vinyl Overlay for Roof Installer. Where?	370Z JT	Southern California Region	13	04-23-2010 02:23 AM
3M DINOC Carbon Vinyl Wrap	spearfish25	Exterior & Interior	10	12-12-2009 09:50 PM

05-25-2010, 01:22 PM	#4 (permalink)
Calvin A True Z Fanatic Join Date: Aug 2009 Location: Castro Valley, CA Age: 35 Posts: 1,418 Drives: 4GS, R8v10 Rep Power: 19	ahh . that's what i was thinking the adhesive spray wasnt needed. had to make sure cause i was ordering some 3m premium cast vinyl and there was an option for the spray and i didn't know whether or not it was mandatory hah thanks guys! xP

05-25-2010, 01:45 PM	#5 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141522	all good info. after install, set it out in the sun for a few hours to cure. if cloudy, i subsitute using IR heater...