All Carbon Fiber 370Z Body - Ideas and Suggestions

Mike@Blackline · 10-18-2009, 05:37 PM

Hey guys, my name is Mike and I work for Blackline Motorsports. You can check out Mike@Blackline over at my350z to see where we stand in the 350 community; good products, service, respect on the boards, and itrader rating. Ya'll may have seen the relatively new Alliance BBKs, and as a lot of you probably know, they are developing them right now for the 370z and G37. One of the members here is going to be the first to install them, along with a G37 guy. Click the link in my sig!
We will become a vendor on here the day the 370Z BBK is finished, so no worries there admins

All that aside, Alliance is developing an all carbon fiber body for the 350Z right now, and the 370Z will next. The 350's will be all OEM, with the exception of possibly the front bumper, but with shaved holes and rear wiperblade, and the Z badges on the fenders will be eliminated. The only panel that will not be replaced will be the roof; an overlay is planned. Yes, full rear quarterpanels are planned, not overlays

When they get around to the 370, I want to have some feedback ready from you guys for their development. What would you like to see? Shaved or with emblem holes? Eliminate the fender Z badge? Flare the fenders any mm size or keep OEM specs? Make a smooth hood or OEM? Spoiler thoughts?
For the time being, the plan on bumpers is to replicate Nismo ones

I understand that right now I dont have anything to show you in terms of their quality, but that will all be discussed and showcased when the 350z CF project is complete and shared here. So what would you guys like to see in the designs? Discuss!

Mike@Blackline · 10-19-2009, 11:42 PM

bump?

phelan · 10-20-2009, 12:30 AM

Replicate the OEM stuff first imo. I know some people are for the "clean" look but I like having my badges on. Fenders I might go for doing away with though. Dunno, not much thought right now.

Brazilbro · 10-20-2009, 02:02 AM

OEM, maybe do the doors without the big handles

Mike@Blackline · 10-20-2009, 02:23 AM

Quote:

Originally Posted by Brazilbro

OEM, maybe do the doors without the big handles

Hmm that would be quite interesting, a lot moe work im sure on their development end, but it would be awesome to have some handles similar to the GTR or something of that nature. Maybe even offered shaved and sell in combination with some poppers. i dont have any experience with poppers, but that would be a super clean look too

good feedback!

bullitt5897 · 10-20-2009, 10:40 AM

Sell them shaved with the SPAL kit!!!

Also I would expand the front fenders 15mm each and the rears 25mm each

On the fronts I would like to see some sort of venting!

Here are a few Ideas I came up with or modified originals:
All CF Nismo with front canards and CF C Pillars (btw the C pillars are 1 piece of plastic and an easy replicable part

)

AMUSE Meets Du-Luck!!!

AMUSE Wide Body (super Legga)

Everyone loves this flared Widebody

Someone else's version of a APR Widebody

I have more I just need to find them

phelan · 10-20-2009, 10:45 AM

Quote:

Originally Posted by battlewagon

Hmm that would be quite interesting, a lot moe work im sure on their development end, but it would be awesome to have some handles similar to the GTR or something of that nature. Maybe even offered shaved and sell in combination with some poppers. i dont have any experience with poppers, but that would be a super clean look too

good feedback!

If you did shaved doors I'd be in for that. Not feelin' the body kits bullitt put up though. I like the car the way it stands right now, maybe in a year or so I'd play with it. But for now the Z34 is plenty wide.

bullitt5897 · 10-20-2009, 10:46 AM

Ohhh BTW here is what GTR handles would look like:

I tried doing them straight but it didnt flow with the lines of the car so you will need to angle them

bullitt5897 · 10-20-2009, 11:09 AM

I did a rendition of the Jon Sibal Widebody and was working with a vendor to create it but that was put on hold! I have the free hands but I would have to fax them or scan them for you.

phelan · 10-20-2009, 11:20 AM

^ huge vents are HUUUUUGE.

GTR handles to me are overrated, I'd much rather see it clean. I may be the only one like that, though, but I like the TVR system of pressing a hidden button to open the door

bullitt5897 · 10-20-2009, 11:24 AM

Quote:

Originally Posted by phelan

^ huge vents are HUUUUUGE.

GTR handles to me are overrated, I'd much rather see it clean. I may be the only one like that, though, but I like the TVR system of pressing a hidden button to open the door

Im with you on the handles in fact I am looking at a way/place to put the button lol probably under the mirror base. I will look during lunch today and see if I can find a spot.

BTW. which vents are you talking about?

ilive2win · 10-20-2009, 07:11 PM

what about some kind of diffuser, like the voltex style diffuser for the 350z, but for the 370z, "of course" that is functional for us track guys...and gals

fuct · 10-21-2009, 09:48 AM

i love how the carbon fiber on the blue photoshop peeks out on the top of the fenders then fades to blue in the front!

B1nks · 10-21-2009, 10:03 AM

Yeah, I wouldn't be down for all those vents and crazy designs, The fronts could be wider but I wouldn't want much since I DD my car and I hate the nismo look, especially on the rear bumper. I would like an OEM replication first and then go from there. I also like my door handles because they work and poppers are gay.

phelan · 10-21-2009, 11:00 AM

Quote:

Originally Posted by bullitt5897

Im with you on the handles in fact I am looking at a way/place to put the button lol probably under the mirror base. I will look during lunch today and see if I can find a spot.

BTW. which vents are you talking about?

i was referring to the humongous vents on the hood. completely unnecessary in my opinion. if i go vents, i like them smaller and flush, for a cleaner look.

yeaaaa bullitt, that's what i'm talking about! TVR 370Z

hahahahaha

10-18-2009, 05:37 PM	#1 (permalink)
Mike@Blackline Enthusiast Member Join Date: Jul 2009 Location: USA Posts: 390 Drives: Z Rep Power: 295	All Carbon Fiber 370Z Body - Ideas and Suggestions Hey guys, my name is Mike and I work for Blackline Motorsports. You can check out Mike@Blackline over at my350z to see where we stand in the 350 community; good products, service, respect on the boards, and itrader rating. Ya'll may have seen the relatively new Alliance BBKs, and as a lot of you probably know, they are developing them right now for the 370z and G37. One of the members here is going to be the first to install them, along with a G37 guy. Click the link in my sig! We will become a vendor on here the day the 370Z BBK is finished, so no worries there admins All that aside, Alliance is developing an all carbon fiber body for the 350Z right now, and the 370Z will next. The 350's will be all OEM, with the exception of possibly the front bumper, but with shaved holes and rear wiperblade, and the Z badges on the fenders will be eliminated. The only panel that will not be replaced will be the roof; an overlay is planned. Yes, full rear quarterpanels are planned, not overlays When they get around to the 370, I want to have some feedback ready from you guys for their development. What would you like to see? Shaved or with emblem holes? Eliminate the fender Z badge? Flare the fenders any mm size or keep OEM specs? Make a smooth hood or OEM? Spoiler thoughts? For the time being, the plan on bumpers is to replicate Nismo ones I understand that right now I dont have anything to show you in terms of their quality, but that will all be discussed and showcased when the 350z CF project is complete and shared here. So what would you guys like to see in the designs? Discuss! __________________ Current Alliance BBK Sale, FREE PC Option, 370Z DiscountCLICK HERE for info! Last edited by Mike@Blackline; 10-18-2009 at 05:40 PM.

10-19-2009, 11:42 PM	#2 (permalink)
Mike@Blackline Enthusiast Member Join Date: Jul 2009 Location: USA Posts: 390 Drives: Z Rep Power: 295	bump? __________________ Current Alliance BBK Sale, FREE PC Option, 370Z DiscountCLICK HERE for info!

10-20-2009, 12:30 AM	#3 (permalink)
phelan A True Z Fanatic Join Date: Apr 2009 Location: CA Age: 38 Posts: 9,513 Drives: Scoobaroo Rep Power: 3406	Replicate the OEM stuff first imo. I know some people are for the "clean" look but I like having my badges on. Fenders I might go for doing away with though. Dunno, not much thought right now. __________________ 凛 ('Rin') - 2009 Nissan 370Z With silence comes peace. With peace comes freedom. With freedom comes silence.

10-20-2009, 10:40 AM	#6 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	Sell them shaved with the SPAL kit!!! Also I would expand the front fenders 15mm each and the rears 25mm each On the fronts I would like to see some sort of venting! Here are a few Ideas I came up with or modified originals: All CF Nismo with front canards and CF C Pillars (btw the C pillars are 1 piece of plastic and an easy replicable part ) AMUSE Meets Du-Luck!!! AMUSE Wide Body (super Legga) Everyone loves this flared Widebody Someone else's version of a APR Widebody I have more I just need to find them __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054* Last edited by bullitt5897; 10-20-2009 at 10:43 AM.

10-20-2009, 10:46 AM	#8 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	Ohhh BTW here is what GTR handles would look like: I tried doing them straight but it didnt flow with the lines of the car so you will need to angle them __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

10-20-2009, 02:02 AM	#4 (permalink)
Brazilbro A True Z Fanatic Join Date: Mar 2009 Location: Indianapolis, IN Posts: 1,131 Drives: Juke/240Z Rep Power: 848	OEM, maybe do the doors without the big handles

10-20-2009, 11:09 AM	#9 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	I did a rendition of the Jon Sibal Widebody and was working with a vendor to create it but that was put on hold! I have the free hands but I would have to fax them or scan them for you. __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

10-20-2009, 11:20 AM	#10 (permalink)
phelan A True Z Fanatic Join Date: Apr 2009 Location: CA Age: 38 Posts: 9,513 Drives: Scoobaroo Rep Power: 3406	^ huge vents are HUUUUUGE. GTR handles to me are overrated, I'd much rather see it clean. I may be the only one like that, though, but I like the TVR system of pressing a hidden button to open the door __________________ 凛 ('Rin') - 2009 Nissan 370Z With silence comes peace. With peace comes freedom. With freedom comes silence.

10-20-2009, 07:11 PM	#12 (permalink)
ilive2win Track Member Join Date: Jul 2009 Location: san diego Posts: 872 Drives: 11WWX Rep Power: 16	what about some kind of diffuser, like the voltex style diffuser for the 350z, but for the 370z, "of course" that is functional for us track guys...and gals

10-21-2009, 09:48 AM	#13 (permalink)
fuct A True Z Fanatic Join Date: May 2009 Location: Sugar Land Posts: 3,692 Drives: 97' Ranger :) Rep Power: 23	i love how the carbon fiber on the blue photoshop peeks out on the top of the fenders then fades to blue in the front!

10-21-2009, 10:03 AM	#14 (permalink)
B1nks Track Member Join Date: Apr 2009 Location: Houston,Tx Posts: 721 Drives: 2009 370Z Base 6MT Rep Power: 507	Yeah, I wouldn't be down for all those vents and crazy designs, The fronts could be wider but I wouldn't want much since I DD my car and I hate the nismo look, especially on the rear bumper. I would like an OEM replication first and then go from there. I also like my door handles because they work and poppers are gay.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
EVO-R 370Z carbon fiber Side Skirts	EVOR	Exterior & Interior	110	12-27-2015 01:10 PM
EVO-R 370Z Carbon Fiber Mirror covers	EVOR	Exterior & Interior	26	12-04-2012 05:29 AM
EVO-R 370Z carbon fiber B Pillars	EVOR	Exterior & Interior	20	10-12-2011 10:51 PM
looking for 370z for carbon fiber project	370z_hot	North East Region	2	05-27-2009 12:57 PM
looking for 370z for carbon fiber project and free carbon fiber products	370z_hot	Exterior & Interior	23	05-16-2009 09:32 PM