Door rattle

umairiqbal96 · 03-17-2020, 07:59 PM

So I just recently got a 2010 z and the driver side door has a pretty bad rattle. This is only happening while listening to music and Ive turned the base down to -2 as well. The z has stock speakers non bose. The dealership actually replaced the driver side speaker because I complained but the rattle is still there. I decided to open the door today to see where it's coming from but I couldn't get past the two clips holding the part to the window and the noise is behind it. I circled where the noise is coming from. I also attached the pic of the clips I couldn't open. If anyone has any idea how to get to it or another fix for it I would appreciate it!

http://cloud.tapatalk.com/s/5e71722c...317_193221.mp4

Sent from my SM-G965U1 using Tapatalk

Quicksilvers · 03-18-2020, 07:38 AM

Most of the Z’s I’ve seen in 2010 do not display any excessive interior noise. Was your Z ever involved in a accident?

umairiqbal96 · 03-18-2020, 08:52 AM

Quote:

Originally Posted by Quicksilvers

Most of the Z’s I’ve seen in 2010 do not display any excessive interior noise. Was your Z ever involved in a accident?

Never been in a accident.

Sent from my SM-G965U1 using Tapatalk

JARblue · 03-18-2020, 08:06 AM

They are just a couple of rivets. Drill them out. Check the FSM for the appropriate bit size.

SouthArk370Z · 03-18-2020, 09:58 AM

IIRC, someone posted a DIY (don't remember if there were pics or not) about R&Ring the window motor.

The BlueMax · 03-29-2020, 01:09 AM

I am experience a similar mid to low bass rattle that I originally thought was in the door panel. I have a custom fully upgraded system and one of my audio techs thought it might be in the window regulator vibrating and suggested a major dynomax door installation. Your rivet area is interesting and I will check this out on my car and pass it on to my audio guys. Thanks for sharing I will let you know of any future updates or progress

mh111 · 04-24-2020, 10:56 PM

I'm not sure if you found them or not but in the upper portion of the door, there are to stickers/covers that reveal 2 more screws. The panel with the window regulator comes out at a downward angle after you unscrew them. You do not need to drill those rivets out. I ran into the same problem when my door lock actuator broke and I needed to remove the panel to get to it.

03-17-2020, 07:59 PM	#1 (permalink)
umairiqbal96 Base Member Join Date: Feb 2020 Location: texas Posts: 9 Drives: 2010 370z automatic Rep Power: 7	Door rattle So I just recently got a 2010 z and the driver side door has a pretty bad rattle. This is only happening while listening to music and Ive turned the base down to -2 as well. The z has stock speakers non bose. The dealership actually replaced the driver side speaker because I complained but the rattle is still there. I decided to open the door today to see where it's coming from but I couldn't get past the two clips holding the part to the window and the noise is behind it. I circled where the noise is coming from. I also attached the pic of the clips I couldn't open. If anyone has any idea how to get to it or another fix for it I would appreciate it! http://cloud.tapatalk.com/s/5e71722c...317_193221.mp4 Sent from my SM-G965U1 using Tapatalk

03-18-2020, 07:38 AM	#2 (permalink)
Quicksilvers A True Z Fanatic Join Date: May 2017 Location: Atlanta, GA Posts: 2,038 Drives: 2017 370z Rep Power: 25464	Most of the Z’s I’ve seen in 2010 do not display any excessive interior noise. Was your Z ever involved in a accident? __________________ Mr. Clean

03-18-2020, 08:06 AM	#4 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 45 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684442	They are just a couple of rivets. Drill them out. Check the FSM for the appropriate bit size. SouthArk370Z likes this. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

03-18-2020, 09:58 AM	#5 (permalink)
SouthArk370Z Premium Member Join Date: Nov 2010 Location: South Arkansas Posts: 8,435 Drives: 2014 Challenger Rep Power: 324199	IIRC, someone posted a DIY (don't remember if there were pics or not) about R&Ring the window motor. __________________ Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

03-29-2020, 01:09 AM	#6 (permalink)
The BlueMax Enthusiast Member Join Date: Jan 2010 Location: Louisville Posts: 337 Drives: 09 370/97 T/A 01 ZRX Rep Power: 27	Bass Rattle I am experience a similar mid to low bass rattle that I originally thought was in the door panel. I have a custom fully upgraded system and one of my audio techs thought it might be in the window regulator vibrating and suggested a major dynomax door installation. Your rivet area is interesting and I will check this out on my car and pass it on to my audio guys. Thanks for sharing I will let you know of any future updates or progress __________________ The Blue Max

04-24-2020, 10:56 PM	#7 (permalink)
mh111 Base Member Join Date: Jul 2019 Location: WA Posts: 1 Drives: 2013 Nissan 370z Rep Power: 7	I'm not sure if you found them or not but in the upper portion of the door, there are to stickers/covers that reveal 2 more screws. The panel with the window regulator comes out at a downward angle after you unscrew them. You do not need to drill those rivets out. I ran into the same problem when my door lock actuator broke and I needed to remove the panel to get to it.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Door Rattle	gbhrps	Nissan 370Z Roadster (Convertible)	8	09-24-2020 11:55 PM
Rattle in door?	CRiZO	Exterior & Interior	14	12-23-2019 06:23 PM
Door Rattle Cure	37Z	Audio & Video	5	04-08-2012 05:25 PM
Door Rattle	hfrog355	Nissan 370Z General Discussions	4	07-23-2010 10:34 AM
Door Area Rattle	earwicker7	Nissan 370Z General Discussions	1	06-11-2009 08:28 PM