TAS2020 Debut: 78Works LED headlights and taillights

Z34_11_0001

https://drive.google.com/file/d/1Phq...ew?usp=sharing

https://drive.google.com/file/d/1KbW...ew?usp=sharing

https://drive.google.com/file/d/1ke2...ew?usp=sharing

https://drive.google.com/file/d/1VBJ...ew?usp=sharing

https://drive.google.com/file/d/1Fpk...ew?usp=sharing


Hopefully this works but I added some pictures of before, during and after the install. It was very straight forward and simple to do. The kit does come with a wiring harness that you do not need (at least I didn't).

The first video shows the turn signals with the connector in the back hooked up to where it is a solid turn signal and the second video I unplugged it to make it sequential. Overall satisfied with the lights and prefer them much more than the '09-'14 stock headlights.

TacoSport10

I had to use that harness to get the brighter DRL to work. That LED strip works dimmer when the lights are on, but the harness was needed when the lights are off for the DRL. I actually had the 6A fuse blow in that harness and noticed my DRL’s not working. Replaced the fuse and took it for another hour ride or so. Maybe that fuse was weak or something. I did have to use a 7.5A as I could not find a 6A at the auto store.

Also, I noticed in your video that with the sequential turn signal the first time the LED’s only goes 1/4 the way up. Mine does the same thing.

Ventruck

To clarify, the DRL you're talking about is the one built into the headlight, not the OEM DRL?

TacoSport10

Correct, the Morimoto headlights have a DRL strip that’s very bright when the headlights are off. That’s what the additional harness is for. When the headlights turn on, that led strip, maybe another one in the same area, turns on and is a little less bright for nighttime.