Originally Posted by trangalang (Post 3872203)

Hate to revive an old thread, but I just installed my Coolerworx shifter last week with the revised V2 plate that's designed for the 370z. No need to drill any holes! Although I do recommend purchasing new M6 bolts as the OEM bolts will only hold the mounting plate in place by 3 or so threads.

One issue that I did run into - the rubber dust boot that covers the linkage underneath the car will not remain in place, as it is originally held up by the shifter bracket/brace that is removed when the Coolerworx unit is installed.

I started feeling vibration in 2nd gear but it eventually smoothed out as I crawled to a stop. This was from the dust boot dangling freely and dragging itself against the driveshaft.

@NorthStyle - Not sure if you ran into this issue as well. But I looked at your photos and it looks like you re-installed the linkage but chose to not install the dust boot cover?

Originally Posted by Overlimit (Post 3918097)

Just wondering, is anyone still experiencing rattling with this shifter? Has anyone been able to remedy the rattling?

Originally Posted by Overlimit (Post 3918097)

Just wondering, is anyone still experiencing rattling with this shifter? Has anyone been able to remedy the rattling?

Originally Posted by BettyZ (Post 3959286)

Yes. The rattling is horrible. 3rd and 4th gear after 3k rpm, the reverse lockout internal cable is rattling/vibrating the hell out of its external. I contacted coolerworx twice and received no response. The rattle legitimately makes the Z undriveable in 3rd and 4th gear; the sound is beyond distracting and into the realm of "drives you batsh*t."

I'm pulling this trash shifter out and installing something that doesn't make me want to tear my ears off. It's a damn shame bc aside from the rattle the shifter is great.

Originally Posted by justin_boy (Post 3959622)

does anyones shaft (not knob) get really hot while driving?

had to hold back while writing this lol

Originally Posted by justin_boy (Post 3959622)

does anyones shaft (not knob) get really hot while driving?

had to hold back while writing this lol

Originally Posted by JARblue (Post 3959618)

I'll take it :hello:

Originally Posted by Rusty (Post 3959644)

Think you would take a used condom if you thought it didn't have any holes in it. :icon14:

Originally Posted by JARblue (Post 3959676)

Why does that matter? :confused:

Originally Posted by Rusty (Post 3959701)

Why would you want a lunch bag that leaks?

Originally Posted by JARblue (Post 3959717)

That's not really a good comparison. More like borrowing someone's cooler and then your lunch leaks all in it. Why do I care as long as I can still eat my lunch? Not my cooler.

Originally Posted by Rusty (Post 3959730)

I take it you never heard the joke I'm thinking about. :rofl2:

I would post it here. But I would get banned.

Originally Posted by JARblue (Post 3959767)

You have my number :tiphat: