SS lip kit / Fly1 motorsports lip kit

brianx42 · 04-25-2018, 05:33 PM

Hi All,

For those of you who have the SS lip kit or the fly1 motorsports lip kit (think they are the same) what did you use to install the kit? Mine didn't come with any bolts and screws.

I'm planning on using 3m tape.

Any tips/suggestions for proper install?

Thanks!

cooltoy · 04-25-2018, 06:59 PM

Hope these help.

Ebay Sunline Replica Urethane Lip Installed/review

Mines CF lip Install help!!

axmea? · 04-30-2018, 03:00 AM

My first kit and had it for a long time. Looks best with matching skirts, rear spats, and the Fujimura diffuser to round it out. Use 3m tape on the fronts double layer on some sections. You'll need to figure that out during test fit. Don't buy tape that you see from the Home Depot. Use VHP from Amazon. It is screwed along the fender well. I strapped it on the bottom. I also recommend skid plates out of 18g steel sheet or better yet aluminum sheet if you can find it. I recommend ShineAutoProject since they are known for better fitment. I got mine from AeroJacket when he was around and fitment was 95%. I think they used the same fabricator at one time. Never had issues with it. Sold my entire front bumper and kit to a member when I switched over. PM me if you have questions.

tims980r (1)WM by Raf, on Flickr

04-25-2018, 05:33 PM	#1 (permalink)
brianx42 Base Member Join Date: Jun 2016 Location: New York Posts: 150 Drives: 14 Nissan 370z SL M6 Rep Power: 8	SS lip kit / Fly1 motorsports lip kit Hi All, For those of you who have the SS lip kit or the fly1 motorsports lip kit (think they are the same) what did you use to install the kit? Mine didn't come with any bolts and screws. I'm planning on using 3m tape. Any tips/suggestions for proper install? Thanks! axmea? likes this.

04-25-2018, 06:59 PM	#2 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,938 Drives: 14 PW 370Z S/T MT Rep Power: 240204	Hope these help. Ebay Sunline Replica Urethane Lip Installed/review Mines CF lip Install help!! __________________ Member of kenchan's "photoshopped mods" and "proper offsets" gang.

04-30-2018, 03:00 AM	#3 (permalink)
axmea? A True Z Fanatic Join Date: Apr 2012 Location: SoCal Posts: 6,233 Drives: WELL ZED PW 6MT Rep Power: 53241	My first kit and had it for a long time. Looks best with matching skirts, rear spats, and the Fujimura diffuser to round it out. Use 3m tape on the fronts double layer on some sections. You'll need to figure that out during test fit. Don't buy tape that you see from the Home Depot. Use VHP from Amazon. It is screwed along the fender well. I strapped it on the bottom. I also recommend skid plates out of 18g steel sheet or better yet aluminum sheet if you can find it. I recommend ShineAutoProject since they are known for better fitment. I got mine from AeroJacket when he was around and fitment was 95%. I think they used the same fabricator at one time. Never had issues with it. Sold my entire front bumper and kit to a member when I switched over. PM me if you have questions. tims980r (1)WM by Raf, on Flickr __________________ >MyZ's Album< NISMO Convert/ECUTEK/Takeda CAI/F.I. HFC NR CB Carbon/F.I. 34 Row Oil Cooler/4.08 Final Drive /Powertrix+Swifts/Hotchkis/SPL/Whiteline/TWM/Zoom Engineering/EVO-R/AeroJacket Vented CF Fenders + CF Spoiler/Avant Garde-WORK/NST/Morimoto Halo/STi Clear Lenses/Carbon Signal Automotive/RJM Performance/ZSpeed Clutch Flywheel CSC delete Last edited by axmea?; 04-30-2018 at 03:19 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fly1 Motorsports WB Body Kit!	Fly1 Motorsports	Body Interior/Exterior	20	07-22-2017 07:43 PM
WTB: Fly1 Motorsports Spec-V Front Lip	royvaldizno	Wanted	0	05-30-2017 03:43 AM