MR WORKS Holiday Season Discount!!!

Spec Jay · 01-01-2010, 03:08 AM

is it too late to get in? found some extra fundsss

Ryan@MRWorks · 01-02-2010, 04:56 AM

Quote:

Originally Posted by TipsZ

I hate how my job blocks the pictures - I wish I could see the results right about now ...

Photo's updated

Quote:

Originally Posted by Spec Jay

wish you guys would extend the discount a little longer. i dont get paid till next friday haha. christmas drained my bank

Totally, know what you mean. Haven't even open up gifts due to family situation...

Quote:

Originally Posted by abgyak

Im waiting for fxroar headlight pics to be uploaded... only then i can decide

abgyak we will be doing a photoshoot with fxroar in the daytime that way we can capture the paint in the light not with a flash it tends to blow out the image. Unfortunately, we seriousy did not have enough time to do a thorough shoot of his vehicle as well it was dark and a lot of condensation and moisture outside it was in the freezing cold morning night when we compelted. Very hard to see what we were doing with a small lamp. We worked around his schedule because he needed his vehicle that same day and it definitely was not the right time of day to do a shoot. We worked from 6am to 3am in the morning just for fxroar Francis and we also fixed his Short Shifter that was seriously loose around the boot area two of the bolts were stripped replaced them with new ones. We also found a few mismatched bolts around his navi that were just lying around. When our customer complained of noises. We inspect everything we do thoroughly before we even approach it. We found a slight indent on his bumper as well and a kinked water hose and pointed it out along with putting in a new parking bulb just for him. We also re-inforced missing underpanel bolts that left his vehicles body plastics flapping around due to a local shop who lost 5 of the main bolts that hold that flaps up. We did this laborious work free of charge just because we care. Along with adding a on/off switch and ran 16ft. of wire to the cabin to an existing location. No drilling of the firewall required. We snapped some very quick shots. Francis is in on our calendar in a few days. Anyway, more photo's soon to come very soon...

For now enjoy. Here are some high-res photo's of another clients headlights during the build. Photo's updated on page 1 and last page here at this link.
http://www.the370z.com/mr-works/1265...k-warning.html

Quote:

Originally Posted by phelan

Ryan,

PM back. Maybe we can meet up sometime before the 11th, I'm off work til then. Let me know bud!

Hey Andrew haven't had the chance to check my pm's Marco and I are out of time I am doing updates off my laptop. You've got PM...

Quote:

Originally Posted by Spec Jay

is it too late to get in? found some extra fundsss

It's never to late. Some details for you Spec Jay ygpm! Let us know.

I've got to head out. Just replying back to everyone's post! Have a happy new year!

Updated: The server went down on me twice but looks like all is well. Due to so much response and all the request here's some eye candy recently added to the gallery posted here as well for those who don't like to read my novels. I will speak to my partner to see what other offers we can manage to do for the new 2010 year. Again from Marco and I thanks to all who got in the holiday special. Stay tuned so much more to come for 2010!:
Color Options: L.E.D Angel Eye Halo

Color Options: L.E.D Demon Eye & L.E.D Angel Eye Halo - White Series

Color Options: L.E.D Demon Eye & L.E.D Angel Eye Halo - Other Options

One of the few members who made it during the special... motoextreme aka Adam's beast of a headlight

...
Shaved Landing Strip - Close Up

Shaved Landing Strip

Matte Black Housing, Shaved Landing Strip, & Projector Shrouds Prepped - Top Angle

Matte Black Housing, Shaved Landing Strip, & Projector Shrouds Prepped - Driver Side Angle

Matte Black Housing, Shaved Landing Strip, & Projector Shrouds Prepped - Passenger Side Angle

Matte Black Housing, Shaved Landing Strip, & Projector Shrouds Prepped - Low Center Angle

Matte Black Housing, Shaved Landing Strip, & Matte Black Projector Shrouds, & Red L.E.D Angel Eye Halos "OFF"

Matte Black Housing, Shaved Landing Strip, & Matte Black Projector Shrouds, & Red L.E.D Angel Eye Halos "ON"- Wide Angle

Matte Black Housing, Shaved Landing Strip, & Matte Black Projector Shrouds, & Red L.E.D Angel Eye Halos "ON"- Driver Side Angle

Matte Black Housing, Shaved Landing Strip, & Matte Black Projector Shrouds, & Red L.E.D Angel Eye Halos "ON" - Low Center Angle

Matte Black Housing, Shaved Landing Strip, & Matte Black Projector Shrouds, & Red L.E.D Angel Eye Halos "ON" - Close Up 1

Matte Black Housing, Shaved Landing Strip, & Matte Black Projector Shrouds, & Red L.E.D Angel Eye Halos "ON" - Close Up 2 (In the dark)

Matte Black Housing, Shaved Landing Strip, & Matte Black Projector Shrouds, & Red L.E.D Angel Eye Halos "ON" - Close Up 3

Matte Black Housing, Shaved Landing Strip, & Matte Black Projector Shrouds, & Red L.E.D Angel Eye Halos "ON" - Aerial Shot

Good night!

370Zsteve · 01-02-2010, 07:53 AM

Incredible work. Amazing variety.

fxroar · 01-02-2010, 01:00 PM

Quote:

Originally Posted by Ryan@MRWorks

abgyak we will be doing a photoshoot with fxroar in the daytime that way we can capture the paint in the light not with a flash it tends to blow out the image. Unfortunately, we seriousy did not have enough time to do a thorough shoot of his vehicle as well it was dark and a lot of condensation and moisture outside it was in the freezing cold morning night when we compelted. Very hard to see what we were doing with a small lamp. We worked around his schedule because he needed his vehicle that same day and it definitely was not the right time of day to do a shoot. We worked from 6am to 3am in the morning just for fxroar Francis and we also fixed his Short Shifter that was seriously loose around the boot area two of the bolts were stripped replaced them with new ones. We also found a few mismatched bolts around his navi that were just lying around. When our customer complained of noises. We inspect everything we do thoroughly before we even approach it. We found a slight indent on his bumper as well and a kinked water hose and pointed it out along with putting in a new parking bulb just for him. We also re-inforced missing underpanel bolts that left his vehicles body plastics flapping around due to a local shop who lost 5 of the main bolts that hold that flaps up. We did this laborious work free of charge just because we care. Along with adding a on/off switch and ran 16ft. of wire to the cabin to an existing location. No drilling of the firewall required. We snapped some very quick shots. Francis is in on our calendar in a few days. Anyway, more photo's soon to come very soon...

I am very grateful not only for the outstanding quality of work, but also for resolving issues on my car that they really didn't have any obligations to fix. Even with very little time they have, they still squeeze some to give customers tour of their shop and cars! Can't stop drooling over them custom carbon fiber on the GT-T Celica

and also Marco's blue Supra rawrrr haha (just sitting right outside parked on the sidewalk???) And the best part is they make deadlines on top of the crazy load they set for themselves. They are very dedicated to their work and also "making customers happy". Ryan, I went to church and prayed for the wellness of your lolo. Hope things get better. Happy new years!

Marco_xyz · 01-06-2010, 03:51 AM

Here are some pics to help you guys decide what exactly you want when submitting an order:
OEM:

PRODUCT OPTIONS:

01-01-2010, 03:08 AM	#46 (permalink)
Spec Jay A True Z Fanatic Join Date: Apr 2009 Location: Bummerton Posts: 1,510 Drives: MtB 09 370z Rep Power: 19	is it too late to get in? found some extra fundsss __________________ 09 Monterey Blue Global Time Attack Street Class Build Build Thread:Saber! Instagram:@SpecJay

01-02-2010, 07:53 AM	#48 (permalink)
370Zsteve A True Z Fanatic Join Date: Sep 2009 Location: Gold Coast CT Posts: 10,599 Drives: 2019 Corvette G.S. Rep Power: 42	Incredible work. Amazing variety. __________________ SOLD MY Z MARCH 2018 - another Core OG moves on - new ride 2019 Z Corvette Grand Sport - no mods necessary but already have eyes on HFC and intakes LOL IT NEVER ENDS.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Holiday (emoticons) Smileys are here! :tup:	kdo2milger	The Lounge (Off Topic)	2	12-08-2009 10:18 AM
AE /// Holiday Free Shipping!!	Paul@AEperformance	AE Performance	0	11-25-2009 11:48 PM
Works vs-xx opinions please	dainedazz	Wheels & Tires	25	10-18-2009 05:12 PM
How Beer Works	Crash	The Lounge (Off Topic)	3	01-29-2009 04:30 AM

01-06-2010, 03:51 AM	#50 (permalink)
Marco_xyz Track Member Join Date: Nov 2009 Location: Sunny San Diego Posts: 710 Drives: 370z / '95 Supra Rep Power: 16	Here are some pics to help you guys decide what exactly you want when submitting an order: OEM: PRODUCT OPTIONS: