Help with Airbag Diagnostic Code

Pekeja

Hello,
I had the airbag light blinking after I installed floor led lights.

I found the solution here on the forum.


It's a description for a electronic reset. It worked for me, I hope it works for you.

****IIMPORTANT****
Turn the ignition off as soon as the airbag light goes out the first time.

If you have the airbag light blinking here is how to reset it:

1. Push the start button two times (Ignition on but engine not started).

2. Watch the airbag light closely. It will stay on for a few secs. and then as soon as it blinks off (the start of the flashing), turn the key off INSTANTLY.

3. Count to 5 (1 Mississippi, 2 Mississippi . . . .)

4. Repeat steps 1-3 two more times until you have done the cycle three times.

5. Now turn the key on and watch the light. It will start blinking in a different, slower manner. This is diagnostic mode. You can watch this for a little while, no hurry.

6. Now turn the key off again, Count to 5 like in step 3 again, and turn back on. If the procedure worked, the airbag light will not be flashing.

If it does not work the first time, just repeat the steps again.

Verstuurd vanaf mijn SM-T550 met Tapatalk