Awesome bro! can't wait to see the pics :tup:

If they fit well, we have another option for our 2013+ front bumper :happydance:

Useless info on the name Ings+1

This was in 2014.......I sent them a quick note about their wing and asked what their name meant. His response.......

“Ings+1” came from “ing” is the progressive form and “+1” stands for we will be "one step ahead” and “one second faster” than everyone else :)"

Sweet, so if I get one my car will be one second faster too? ��

So any word on if this can be made to fit the 13+?

Yea, it'll fit. Nothing changed on the underside of the bumper and the DRL's don't interfere with the symmetric of anything.

Were you able to get around to this?

Hey Jayhovah. I have not gotten around to have it installed yet. My apologies to all those of you that are waiting on fitment confirmation. It's still sitting in my garage along with some Aeroflow side blades :icon14:

I have held it underneath and it does seem to fit and align just fine so I'm more than sure it will be good to go

Dumb question regarding your blades. Fly1 I assume? Did you have to order 1 or 2 for the "quantity"? I'm not seeing anything stating pairs of them on the site.

Go and install those damn parts bro! Or U need that I take a flight to install them for U :bowrofl: I can't wait to see how our 13+ bumper look with that front lip:excited:

I actually bought the blades frome here and they're only sold in pairs.

https://www.aeroflowdynamics.com/col...t-extension-v3

damn they look great!:tup:

indeed! The aluminum ones look much better to me than the FRP EVO-R versions.

Amazing find! Debating on pulling the trigger on the 1st version style right now. $170 shipped is dirt cheap for blades. Especially if they're aluminium and powdercoated.

Can you take some photos of the blades if you have some time? I may be ordering some tonight at this rate....

The V2 look definitively better since they have the little wing at the back. I'll take some pics later this evening.

I just wonder how they'll look with the INGS on the front since that also has the raised wing shaped on the sides. Wondering if it would look offsetting with dual wings technically. The V2 do look better than the V1 though.

Exactly my same thoughts. That's why I've delayed installing the INGs. Out of the two, I like the blades much better and these guys at Aeroflowdynamics also have the aluminum splitter and rear diffusers

Found this on one of the 370z Facebook groups, apparently it fits with 0 modifications.

What and where to get that?

It's the rep lip, there is a couple different vendors on eBay selling them.. All around $100, ordered one today, soon as it's on I'll post some pics.

iG1-Style Front Lip (Urethane) Fits 09-12 Nissan 370z | eBay

Mines a 14 they say it fits?

From the sounds of it, looks like it fits pretty good.
It's not listed as fitting but since it mounts to the underside of the bumper it lines up anyway. The one in the picture is a 2015, the guy said he didn't have to do anything special, just screwed into place.

What yr is yours, and post pics fast, lol

Mine is a 2013, lip should be here this coming week and I'll know for sure but I expect it to be fine.

I sent email to AFD to see if they can do CF on side skirt V3, response I got was NO, but they make CF for V1 side skirt.

I wondered since the stock front air dam is the same on all years..

Daaamn looks fcking great! :drool:

Can you host the pics here? Photobucket doesn't love you.

I haven't had a chance to transfer my photos to Flickr. Screw photobucket. I used them for the ease of pasting stuff here and not having it blown out of proportion. But they're pulling this crap now so I hope they die.

Let's test out Flickr...

https://farm5.staticflickr.com/4256/...4a407b4b_b.jpgIMG_20170502_173622_zpszlgke8vb by Michael Guerrieri, on Flickr

https://farm5.staticflickr.com/4304/...47c04bf0_b.jpg
https://farm5.staticflickr.com/4280/...55a66b69_b.jpg
https://farm5.staticflickr.com/4329/...9778c3d4_b.jpg
https://farm5.staticflickr.com/4214/...45b7b35a_b.jpg
https://farm5.staticflickr.com/4279/...aaf22305_b.jpg
https://farm5.staticflickr.com/4256/...d77a9467_z.jpg
https://farm5.staticflickr.com/4328/...64bf3c8a_b.jpg
https://farm5.staticflickr.com/4208/...c0534025_b.jpg
https://farm5.staticflickr.com/4299/...ff71b027_b.jpg
https://farm5.staticflickr.com/4265/...e144a106_b.jpg
https://farm5.staticflickr.com/4218/...dbc67b24_b.jpg
https://farm5.staticflickr.com/4322/...e8d327b9_b.jpg
https://farm5.staticflickr.com/4327/...305fa846_b.jpg
https://farm5.staticflickr.com/4278/...017307af_b.jpg
https://farm5.staticflickr.com/4293/...fb1564e4_b.jpg
https://farm5.staticflickr.com/4254/...6945eec2_b.jpg
https://farm5.staticflickr.com/4294/...e6e70638_b.jpg
https://farm5.staticflickr.com/4240/...ea7fe1bb_z.jpg

That was a wokout transferring from photobucket to flickr. hahahaha

Is that raw or did you paint it? Car year? Thanks

Unpainted. I purchased a long roll of 3m carbon fiber tape to eventually put on it. Otherwise I highly recommend getting it painted and sealed correctly otherwise it will begin to turn yellow over time.

Car is 2009, but the front lip will fit all model years other than Nismo. Nothing has changed drastically.

Does this require bumper removal? From the picture looks like it fits on 13+ bumper.

From page 7 it really does..

You could probably do it with the bumper on though I'm sure it would be much easier with it off. It only takes a few minutes to remove the bumper cover anyhow so in my mind that's essentially a non-issue.

Sigh...

I'll make a DIY next time I take it off since people can't skim through a few pages on this thread.

Fitment on a 2016 was poor at best. Got it on but the mold is quite different. Will pull it off and make some reliefs in the backside to hopefully tighten it up.

Where was it really bad??

I'd barely put it in the similar category.