I already stole my girlfriends blowdryer.

Huh. A 2015 Nismo front bumper is only $430 from Z1. I won't even feel bad if I screw mine up.

looks like a double bed to me lol its tiny

:worthless:

Come on, lets see those pics of the install process for faks sake :rofl2:

:icon18: Thanks Dear God for our girlfriends hahhaha! I take her nailpaint to touch up my calipers when I scratch them looooooool!:wtf2:

:iagree::iagree:

You will see bro! the lip are going to look great!:tup:

Mine has a 1/4" gap on the driver's side and it drives me crazy.

Please post pictures of your lip and the gap your talking about. Thanks.

Disregard all the old wax on it. hahaha. Needs a good buff anyways.

The gap is right inbetween the 2 holes that allow you to put in tapping screw. I'm going to use a drill bit to make another hole right in the middle of where the gap is to fit my drill so I can nut/bolt the sucker down as tight as it'll take. I HIGHLY recommend using nuts and bolts for all of the tapping screw locations. A much more secure fit. I plan to take out all the tap screws and replace them with matching nuts and bolts.

http://i1097.photobucket.com/albums/...psrnxcl5vj.jpg

Finished result for the most part.

http://i1097.photobucket.com/albums/...pseonvht2o.jpg

http://i1097.photobucket.com/albums/...psyywlwdkt.jpg

*Note* Don't own a husky/german shepherd mix unless you LOVE cleaning up dog hair every 2 hours
http://i1097.photobucket.com/albums/...psyfemyihp.jpg

This looks really, really good. Nice find and nice job!

If anyone wants other viewing angles, let me know. I just can't put the bumper back on the car yet. Pouring the past 3 days.

Would you take some from the side of the bumper?

You just have to be a pita :rofl2:

:tiphat:

http://i1097.photobucket.com/albums/...pskscww8ax.jpg
http://i1097.photobucket.com/albums/...pspi43kfkm.jpg
http://i1097.photobucket.com/albums/...psmfyjnwc3.jpg
http://i1097.photobucket.com/albums/...pssxdalu9f.jpg

Thank you, sir. Again, it really looks good. Hope it stops raining soon so that you can put the bumper back on.

More photos to come! Only 80% chance tomorrow hahahaha

looks great op :)
careful with your lip in the sun, wash chemicals and uv will yellow/whiten it over time, as it did to my front lip. meguiars has a black plastic restorer that works great, brings back the black and shine, just a fyi for future reference

Looks great bro! awesome work! Btw put some pics of the bumper installed in the Z ;)

Hopefully by Wednesday this week. It has literally rained the past 6 days straight. And it's 36 degrees out currently....

Damn!!!!! :eek:

Dont worry bro, when you have a chance!:tup:

Why is it that when I work on my car, nothing ever goes right. The bumper is finally back on and I now have a huge gap between the left side headlight and the hood somehow. Never touched the headlight, bumper, or hood. I also have a gap between the right side headlight and the bottom on the bumper. No idea what I did. Here are some photos of it on finally.

http://i1097.photobucket.com/albums/...psrijm13or.jpg
http://i1097.photobucket.com/albums/...psqr2bfi4r.jpg
http://i1097.photobucket.com/albums/...pssn53q0gi.jpg
http://i1097.photobucket.com/albums/...psocm3tvby.jpg



And here are the gaps I was talking about. If anyone has any ideas, let me know...
http://i1097.photobucket.com/albums/...psrzwqgpvq.jpg
http://i1097.photobucket.com/albums/...pszdh3vgf3.jpg

Lip looks good, homeboy.

Thanks!! Now to rip it all off again to see what I messed up for the hood and headlight gap issue...

I think the issue is what onz referenced in the other thread. I'm sure you'll get it fixed with no problems.

By the way, did you paint/clear coat the lip, or did you leave it the way it came?

I hope that's the case. The gap is literally driving me insane already. If it wasn't pitch black outside, i'd be out screwing with everything again.

I just left it the way it is. I will eventually get it painted glossy black and clear coated so it doesn't yellow over time.

Bro I love it! looks great! :tup:

Memphis and Carl, eat your heart out! I tried my best to realign the bumper and headlights. Still slightly different gaps between the left side housing and hood. And still a slight gap between the top of the bumper on the bottom of the right headlight housing. But way better than yesterday. And the lip looks gorgeous now that it's detailed properly.

http://i1097.photobucket.com/albums/...psqtlaaiek.jpg
http://i1097.photobucket.com/albums/...ps2z0qmphs.jpg
http://i1097.photobucket.com/albums/...psdylxds97.jpg
http://i1097.photobucket.com/albums/...pskrggtrqz.jpg
http://i1097.photobucket.com/albums/...psxeizwwl9.jpg
http://i1097.photobucket.com/albums/...psy9lc3wwb.jpg
http://i1097.photobucket.com/albums/...psum9s2y9s.jpg
http://i1097.photobucket.com/albums/...pszyr1dgvz.jpg

Very nice! Glad you had some success getting things aligned and such. I think I'll place my order tonight.

Now to get rid of that ricer tow hook. :icon17:

Unlike you, I actually like to take mine to the track :inoutroflpuke:

Driving past the high schools running track does not count.

:icon17:

Trust me bro! If not was because my car already have a front lip, I buy this right now haahah! looks amazing... I like it a lot!:tup:

At least on the pics I dont see the bumper gap :p

Thanks Carl! For $115, i'd get one and just hotswap whenever you want lol

Hhahahaa! If not was because I want make a few suspension upgrades, I will do :p

But Its a good idea!:stirthepot:

Looks pretty good! Now for someone to pull the trigger on a 13+ and be the fitment guinea pig!

Sent from my SM-G930W8 using Tapatalk

I bought and received mine last week. I'll be the guinea pig for the 13+ model. I did a preliminary test fit and it looks like it would be just fine. I think the bumper bottoms are the same on all model years... Except Nismo of course.

I will be installing mine next week.

You are correct. The bottom really hasn't changed much. May those slight overhangs on the side, but nothing that would impact fitment with the lip.

Nice! Looking forward to pics!

Sent from my SM-G930W8 using Tapatalk