Nissan 370Z Forum
Page 3 of 4 12 3 4
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Exterior & Interior (http://www.the370z.com/exterior-interior/)
-   -   Tach Trim (http://www.the370z.com/exterior-interior/120373-tach-trim.html)

ChaseZ 03-14-2017 11:40 PM
Quote:
Originally Posted by cooltoy (Post 3627454)
Wow look at the difference in price $190 usd plus shipping compared to $150 cdn shipped off RHD website

That Aussie one is $89 usd

cooltoy 03-14-2017 11:43 PM
Quote:
Originally Posted by ChaseZ (Post 3627453)
Wow that is incredibly poor fit. I wouldn't want that either so CA is out regardless. I'll see about finding some images of the RHD one installed.

This is the description on their website. Like we talked about I'm not sure if that truly means this is a complete swap out for the PEM piece or not. Could be a language thing in translation.
I am pretty sure the picture I posted below CS is RHD. EVOR posted it in a thread called CF RHD pieces, before he started making his own. I am 99.9% sure that it is an overlay piece not a replacement. The 3M tape is a give away.

The CS piece could have been a bad install or a test fit. I will show them the pic after they reply to your questions.

cooltoy 03-14-2017 11:44 PM
Quote:
Originally Posted by ChaseZ (Post 3627457)
Wow look at the difference in price $190 usd plus shipping compared to $150 cdn shipped off RHD website

That Aussie one is $89 usd
I saw that. Gullible ebay shoppers.

cooltoy 03-14-2017 11:48 PM
Quote:
Originally Posted by ChaseZ (Post 3627456)
Stumbled on this some JDM site from Australia

370Z Z34 Meter panel S type Gauge Surround

Even have it in what I'll call a silver carbon fibre
I'll have to figure out which weave EVOR uses. I'd need to match to the window switch covers I got. I think it's 2x2.

http://bespokebimmer.com/wp-content/..._2x2_large.jpg

At least we have options.

carlitos_370z 03-15-2017 06:32 AM
I want some carbon bits to the interior of my Z too :p

TreeSemdyZee 03-15-2017 09:12 PM
Quote:
Originally Posted by cooltoy (Post 3627460)
I'll have to figure out which weave EVOR uses. I'd need to match to the window switch covers I got. I think it's 2x2.

http://bespokebimmer.com/wp-content/..._2x2_large.jpg

At least we have options.


Definitely 2x2 twill.
The 1x1 doesn't look that great IMO.


Sent from my iPhone using Tapatalk

TriNismo 03-15-2017 11:51 PM
Tach Trim
 
I have the Curious Models one from RHDJapan. Decent fit, good quality, and you'll get some Japanese instructions too lol. Apologies for the poor nighttime shots
https://uploads.tapatalk-cdn.com/201...9f45844eb1.jpg
https://uploads.tapatalk-cdn.com/201...88749f1e6d.jpg
https://uploads.tapatalk-cdn.com/201...936db05701.jpg
https://uploads.tapatalk-cdn.com/201...dd930dd923.jpg


Sent from my iPhone using Tapatalk

ChaseZ 03-16-2017 01:45 AM
Thanks for posting that. Helps a lot.

Just to confirm that's a cover that goes over top of the existing one, not a complete replacement piece for it right? Did the cluster have to come out to put it on? I'm assuming it just sticks overtop and uses two sided tape but figured I better ask to be sure.

Looks great!

carlitos_370z 03-16-2017 06:29 AM
I like that one man! looks like they come from factory :tup:

TriNismo 03-16-2017 10:07 AM
Quote:
Originally Posted by ChaseZ (Post 3627943)
Thanks for posting that. Helps a lot.

Just to confirm that's a cover that goes over top of the existing one, not a complete replacement piece for it right? Did the cluster have to come out to put it on? I'm assuming it just sticks overtop and uses two sided tape but figured I better ask to be sure.

Looks great!


Yes it's a cover, attached with double sided tape. Goes right on.


Sent from my iPhone using Tapatalk

CarbonSignal 03-18-2017 11:16 PM
Quote:
Originally Posted by cooltoy (Post 3627451)
This is what CS one looks like from the top. Not sure if I am feeling the exposed parts.

http://www.the370z.com/members/gurne...-installed.jpg
Thats not installed corretly, carbon part goes under the upper dash piece so needed to be pushed more in till its flush

cooltoy 03-18-2017 11:18 PM
That's what I figured.

carlitos_370z 03-20-2017 06:34 AM
Quote:
Originally Posted by CarbonSignal (Post 3629191)
Thats not installed corretly, carbon part goes under the upper dash piece so needed to be pushed more in till its flush
Do you have some pics to see how it looks correctly installed?

CarbonSignal 03-20-2017 02:09 PM
Will post tomorrow there is a car at shop

carlitos_370z 03-20-2017 02:21 PM
Quote:
Originally Posted by CarbonSignal (Post 3629651)
Will post tomorrow there is a car at shop
Thanks!:tup:


All times are GMT -5. The time now is 07:08 AM.
Page 3 of 4 12 3 4
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2