window problem

95TTurboZX · 01-31-2017, 04:15 PM

First off, I've searched and read the threads on resetting the windows when they won't auto close. That isn't the problem but I tried it just to make sure. My drivers window does not drop the 1/8 inch or so that it should when the door is opened. Passenger side works fine and the window operates normally otherwise. I have a roadster and the window is catching the top and not sealing properly. It is under warranty so I dropped it off for service. Diagnosed as bad window motor. Motor changed out and problem still exists. Re-diagnosed as a control module, changed and still have problem. 3 days later and consulting NISSAN tech the dealer still has no solution. I thought some of you tech gurus might have an answer. Thanks

TreeSemdyZee · 01-31-2017, 05:26 PM

Have you tried the long reset?

Put the car in on mode (like it's running, but without running). Close the doors.
Push the switch down, but not all the way down into the auto mode, for 20 seconds.
Now pull up, but not into the auto position. Once it reaches the top, hold for another 20 seconds.
This should reset everything.

JARblue · 01-31-2017, 06:30 PM

If that doesn't work, try a different dealer ... hopefully one that's actually competent

95TTurboZX · 01-31-2017, 06:50 PM

Haven't tried that. I would think both windows would have the problem if it required a reset. Maybe the dealer will eventually figure it out, they're the only one close by. Too bad, today was "top down" weather and tomorrow is going to be even nicer

At least they gave me a Versa Note as a loaner!

TreeSemdyZee · 01-31-2017, 06:54 PM

Nope. The windows have to be reset separately.

axmea? · 01-31-2017, 10:29 PM

There are two ways. One is the reset procedure mentioned above and the other is by disconnecting your battery and then reconnect. That's a dealer misdiagnosis I believe.

01-31-2017, 04:15 PM	#1 (permalink)
95TTurboZX Base Member Join Date: Jan 2014 Location: Jacksonville, NC Posts: 45 Drives: 2015 NISMO Tech BS Rep Power: 11	window problem First off, I've searched and read the threads on resetting the windows when they won't auto close. That isn't the problem but I tried it just to make sure. My drivers window does not drop the 1/8 inch or so that it should when the door is opened. Passenger side works fine and the window operates normally otherwise. I have a roadster and the window is catching the top and not sealing properly. It is under warranty so I dropped it off for service. Diagnosed as bad window motor. Motor changed out and problem still exists. Re-diagnosed as a control module, changed and still have problem. 3 days later and consulting NISSAN tech the dealer still has no solution. I thought some of you tech gurus might have an answer. Thanks

01-31-2017, 05:26 PM	#2 (permalink)
TreeSemdyZee Premium Member Join Date: Dec 2009 Location: Kentuck-IANA Age: 59 Posts: 4,880 Drives: '09 370 & ‘14 Juke Rep Power: 27408	Have you tried the long reset? Put the car in on mode (like it's running, but without running). Close the doors. Push the switch down, but not all the way down into the auto mode, for 20 seconds. Now pull up, but not into the auto position. Once it reaches the top, hold for another 20 seconds. This should reset everything. JARblue and callmebatman like this. __________________ Borla S-Type \| Motordyne \| Z1 (lots) \| South Bend \| K&N \| Nismo/Nismo S-Tune \| Eibach \| Aerojacket \| Fujimara \| Spl \| ZSpeed Performance \| Kenwood-Infinity-Sound Ordnance \| Whiteline \| Ecutek \| Hotchkis \| Clazzio \| VQ Vortex \|Morimoto XB \|Dynosty Tune 329.64hp 265.73 ft/lb

01-31-2017, 06:30 PM	#3 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,449 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	If that doesn't work, try a different dealer ... hopefully one that's actually competent __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

01-31-2017, 06:54 PM	#5 (permalink)
TreeSemdyZee Premium Member Join Date: Dec 2009 Location: Kentuck-IANA Age: 59 Posts: 4,880 Drives: '09 370 & ‘14 Juke Rep Power: 27408	Nope. The windows have to be reset separately. __________________ Borla S-Type \| Motordyne \| Z1 (lots) \| South Bend \| K&N \| Nismo/Nismo S-Tune \| Eibach \| Aerojacket \| Fujimara \| Spl \| ZSpeed Performance \| Kenwood-Infinity-Sound Ordnance \| Whiteline \| Ecutek \| Hotchkis \| Clazzio \| VQ Vortex \|Morimoto XB \|Dynosty Tune 329.64hp 265.73 ft/lb

01-31-2017, 10:29 PM	#6 (permalink)
axmea? A True Z Fanatic Join Date: Apr 2012 Location: SoCal Posts: 6,233 Drives: WELL ZED PW 6MT Rep Power: 53241	There are two ways. One is the reset procedure mentioned above and the other is by disconnecting your battery and then reconnect. That's a dealer misdiagnosis I believe. __________________ >MyZ's Album< NISMO Convert/ECUTEK/Takeda CAI/F.I. HFC NR CB Carbon/F.I. 34 Row Oil Cooler/4.08 Final Drive /Powertrix+Swifts/Hotchkis/SPL/Whiteline/TWM/Zoom Engineering/EVO-R/AeroJacket Vented CF Fenders + CF Spoiler/Avant Garde-WORK/NST/Morimoto Halo/STi Clear Lenses/Carbon Signal Automotive/RJM Performance/ZSpeed Clutch Flywheel CSC delete

01-31-2017, 06:50 PM	#4 (permalink)
95TTurboZX Base Member Join Date: Jan 2014 Location: Jacksonville, NC Posts: 45 Drives: 2015 NISMO Tech BS Rep Power: 11	Haven't tried that. I would think both windows would have the problem if it required a reset. Maybe the dealer will eventually figure it out, they're the only one close by. Too bad, today was "top down" weather and tomorrow is going to be even nicer At least they gave me a Versa Note as a loaner!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Window tint problem	peleincubus	Nissan 370Z General Discussions	32	07-29-2014 05:10 PM
Window problem	Redz2009	Exterior & Interior	7	05-22-2013 05:31 AM
!HELP! window problem!	res0zsfa	Exterior & Interior	11	12-27-2012 12:21 AM
Help with a window problem	Phil	Exterior & Interior	3	04-21-2010 10:26 PM
Window problem, maybe...	MeetJoeAsian	Nissan 370Z General Discussions	18	03-27-2010 06:34 PM