Aftermarket bback to OEM headlight Ballasts

carvalho360 · 12-22-2016, 11:23 AM

Tired of having headlight problems every 6 months, I'm trying to make the switch back to OEM ballasts but I did not do the original OEM to Aftermarket. Having some preswitch anxiety clearly

and need some help.

OEM: I have a ballast with pre-attached ignitor. (just one as I haven't committed fearful of the cost associated)

Aftermarket: Ballast with a relay harness i believe its called...has 2 separate plugs. One for the igniter and another with 2 plugs that run into pos/neg metal tips that connect further into a wiring harness id suppose. Sorry if that isn't clear, its too cold to take good photos with the tire off, waiting to get into my garage this weekend

If I make the switch back, is it possible the guy that made the original conversion hacked up the wiring harness that plugs into the bottom of the ballast? Does that whole setup require replacing and whats the likely cost?

Where could the original connection have been relocated to if the aftermarket kit doesn't plug directly into it...The image i attached shows the wire i cant find (not the ballast igniter one)

I hope this makes sense haha

Knockoutpie · 12-28-2016, 12:23 PM

Sorry this makes no sense to me. But, the oem harness likely is plugged into that red/black cable you see there on the ballast. With an OeM ballast the harness plugs into that directly and that short extension is eliminated. Not sure why you don't have OEM ballasts as they can power HIDs just fine, unless you went with 55w or something.

Daniel123588 · 01-01-2017, 08:31 PM

Explanation is not good enough. Need to take off the headlights and take a pic of what has been done if you want more proper feedback and suggestions.
To help you with your verbiage, visit theretrofitsource.com. You will find everything you need there including male/female harnesses that plug straight into the OEM ballast.

IN your picture you attached. The silver park that goes on to the D2S bulb is an igniter. The open ended black harness is a just a male/female harness.

As mentioned, actual pics of the previously done work would be helpful. Good luck.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Ballasts & HID OEM bulbs	nismo1.0	Parts for sale (Private Classifieds)	4	06-22-2015 10:19 AM
[FOR SALE] ballasts and bulbs	nismo1.0	Parts for sale (Private Classifieds)	5	12-01-2014 02:13 PM
[WTB] Oem ballasts x2	nomodsjk	Parts for sale (Private Classifieds)	11	09-10-2014 01:56 PM
[FOR SALE] stock Ballasts,bulbs,and more	fairz	Parts for sale (Private Classifieds)	3	01-12-2014 05:40 PM
[FOR SALE] 370z Headlights w/o Ballasts	W.O.W. 370Z	Parts for sale (Private Classifieds)	12	04-29-2013 02:06 PM

12-28-2016, 12:23 PM	#2 (permalink)
Knockoutpie Base Member Join Date: Jun 2016 Location: Gilbert Arizona Posts: 93 Drives: 2013 370z Sport Rep Power: 8	Sorry this makes no sense to me. But, the oem harness likely is plugged into that red/black cable you see there on the ballast. With an OeM ballast the harness plugs into that directly and that short extension is eliminated. Not sure why you don't have OEM ballasts as they can power HIDs just fine, unless you went with 55w or something.

01-01-2017, 08:31 PM	#3 (permalink)
Daniel123588 Base Member Join Date: Dec 2015 Location: Hawaii Posts: 192 Drives: 2012 370z sport Rep Power: 9	Explanation is not good enough. Need to take off the headlights and take a pic of what has been done if you want more proper feedback and suggestions. To help you with your verbiage, visit theretrofitsource.com. You will find everything you need there including male/female harnesses that plug straight into the OEM ballast. IN your picture you attached. The silver park that goes on to the D2S bulb is an igniter. The open ended black harness is a just a male/female harness. As mentioned, actual pics of the previously done work would be helpful. Good luck.