Clazzio leather seat covers - Custom

dvboy

Just got to keep working the back of the seat,it was tight for me but just had to keep working it.The headrest looked to be an impossible fit at first,not sure if this helped,but I heated up the cover with a blow drier and squeezed the headrest with it still on the seat for extra leverage and eventually got there,it's tight no doubt,but looks good once it's on.

HulaGirl

Thanks for offering up the advice on the headrest cover. It's a nice day here and we decided to get the passenger side in. Working on the headrest now- it's like putting a gallon of crap into a quart sized container.

Still trying to get the velcro to meet too.

__________________
~*Hula Girl at Heart*~
Rear Deck Spoiler, Splash Guards, AFE filters, Weathertech Liners, Xpel, Calipers in VHT Bright Blue, Clazzio Seatcovers

ColemanLee09

The velcro part is a lot easier if u have someone pushing down on the front in the middle of the seat and someone pulling the velcro from the back. Headrest was hard with 1 person and damn near impossible, but with 2 people just flip the headrest clazzio inside out about half way and just have 1 person squeeze the headrest and the other person pull down on it, 5 min job with 2 people, 1 person couldn't even do it in 1 hour. haha.

__________________
09 370Z Sport 6MT Chicane Yellow

HulaGirl

Hubby was helping me with the seat cover and we pushed/pulled, pushed/pulled. Gonna wait for a warmer day and a few times sitting on it to see if it stretches a bit. Gotta say, it looks great even though the velcro is not attached.

I did the headrests myself since he had to move on to another project. Took me about 75 min to do both with a hairdryer. I had them off the seat, inside the house. Probably a mistake but they got done.

__________________
~*Hula Girl at Heart*~
Rear Deck Spoiler, Splash Guards, AFE filters, Weathertech Liners, Xpel, Calipers in VHT Bright Blue, Clazzio Seatcovers