twin throttle bodies

Elmo370z · 12-01-2014, 09:05 AM

Just a quick question. With the bigger bore throttle bodies is it necessary to do any porting job with the runners?

Akurei · 12-01-2014, 11:56 AM

Well, the more air you throw at the engine, the more fuel you'll need to throw in there to keep a perfect air to fuel ratio. I haven't really looked up this car too much yet. But seeing how people throw in intakes and exhaust or ITB's, it seems the fuel pump and injectors are enough for upgrades. Haven't seen anyone list fuel mods otherwise.

So in short, maybe just a tune afterwards if you want your mpg back and benefit off the hp and torque.

(I have no clue where I was going with this btw) Bwahahahahaha

1slow370 · 12-01-2014, 01:08 PM

well eventually it is necessary to replace both throttles with completely different ones, rewire the car, and throw out both factory manifolds. To get Big NA numbers outta this car you gotta drop a mint on it, or buy mine lol /shamless plug. You don't need to do anything else to get bigger throttle bodies to work on the Z other than maybe some throttle map tuning depending on how big you go with them.

Elmo370z · 12-01-2014, 11:56 PM

Gotcha. Thanks for the help.

synolimit · 12-06-2014, 09:58 PM

No you don't have to. The heads are the biggest part of the intake system. We port the lower mani quite a bit to get it to port match but we won't do it unless we have the heads too. The whole system works this way. The closer to the engine you are, the bigger that item will be. Nissan wants the system to step down and not step up killing the air flow hitting a big lip. When we sell our kit we port match everything so there's no step in either direction. I think we'll at least start gasket matching the lower to head though to get more air in. My lower by an older porter left a good deal there. I've got a good 1/16-1/8" that can go!

Elmo370z · 12-07-2014, 10:32 AM

If your car went up for sale last year, I would of bought the car no questions asked.

12-01-2014, 09:05 AM	#1 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,707 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	twin throttle bodies Just a quick question. With the bigger bore throttle bodies is it necessary to do any porting job with the runners?

12-01-2014, 11:56 AM	#2 (permalink)
Akurei Enthusiast Member Join Date: Feb 2014 Location: California Posts: 319 Drives: 14 370z Rep Power: 11	Well, the more air you throw at the engine, the more fuel you'll need to throw in there to keep a perfect air to fuel ratio. I haven't really looked up this car too much yet. But seeing how people throw in intakes and exhaust or ITB's, it seems the fuel pump and injectors are enough for upgrades. Haven't seen anyone list fuel mods otherwise. So in short, maybe just a tune afterwards if you want your mpg back and benefit off the hp and torque. (I have no clue where I was going with this btw) Bwahahahahaha Last edited by Akurei; 12-01-2014 at 11:59 AM.

12-01-2014, 01:08 PM	#3 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7250	well eventually it is necessary to replace both throttles with completely different ones, rewire the car, and throw out both factory manifolds. To get Big NA numbers outta this car you gotta drop a mint on it, or buy mine lol /shamless plug. You don't need to do anything else to get bigger throttle bodies to work on the Z other than maybe some throttle map tuning depending on how big you go with them. Elmo370z likes this. __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50

12-06-2014, 09:58 PM	#5 (permalink)
synolimit A True Z Fanatic Join Date: May 2013 Location: Columbus, OH Posts: 5,051 Drives: 2013 Silver 370z Rep Power: 3388	No you don't have to. The heads are the biggest part of the intake system. We port the lower mani quite a bit to get it to port match but we won't do it unless we have the heads too. The whole system works this way. The closer to the engine you are, the bigger that item will be. Nissan wants the system to step down and not step up killing the air flow hitting a big lip. When we sell our kit we port match everything so there's no step in either direction. I think we'll at least start gasket matching the lower to head though to get more air in. My lower by an older porter left a good deal there. I've got a good 1/16-1/8" that can go! Elmo370z likes this. __________________ 13 370z-

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Cleaning throttle bodies	dthem370	Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs	88	02-12-2016 11:22 AM
Larger Throttle bodies...?	TypeOne	Intake/Exhaust	24	11-16-2015 12:42 PM
Porting Throttle bodies?	RyanWest	Engine & Drivetrain	6	11-25-2013 12:41 PM
can the throttle bodies be taken off?	boomboom	Engine & Drivetrain	9	11-03-2013 01:46 PM
Impul Throttle Bodies	370Ztune	Engine & Drivetrain	6	05-25-2009 03:33 AM

12-01-2014, 11:56 PM	#4 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,707 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	Gotcha. Thanks for the help.

12-07-2014, 10:32 AM	#6 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,707 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	If your car went up for sale last year, I would of bought the car no questions asked.