Need Japanese instruction translation

JARblue · 09-24-2014, 04:05 PM

Kenchan says its just a caution about handling and clean/oil appropriately etc. Do the valve clearance while cold 0.33 mm. Not sure if he'll post in here or not.

1slow370 · 09-24-2014, 05:54 PM

Quote:

Originally Posted by JARblue

Kenchan says its just a caution about handling and clean/oil appropriately etc. Do the valve clearance while cold 0.33 mm. Not sure if he'll post in here or not.

Sounds good so far .33 or .013" is the service manual spec, so long as there isn't anything about optional or recommended spring changes I'm happy that or if there is anything that differs from the fsm, it looks like a pretty simple sheet so I'm not expecting it to say much. I work clean, cover everything in engine assembly lube, and follow the fsm so it should be good.

09-24-2014, 04:05 PM	#1 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 45 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684442	Kenchan says its just a caution about handling and clean/oil appropriately etc. Do the valve clearance while cold 0.33 mm. Not sure if he'll post in here or not. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
m370 installation instruction	Red_Z	Intake/Exhaust	4	01-10-2013 08:15 PM
any diy or instruction for Fender install?	martin82	Exterior & Interior	15	10-07-2012 04:15 PM
Race Driving Instruction Books	SailFree	The Lounge (Off Topic)	2	05-16-2012 01:24 PM