I would eat up a 7 speed shift knob.

We will make it happen. Soon as i get these other projects knocked out the 7 speed shift knob will be high on the priority list.

Intake Mani!!!!!!!!!!!!

intake manifold is a bit more in depth. We can absolutely do it but we would need to get a list of guys willing to pay the price needed for the part.

I dont like to re-invent the wheel usually but I see a small void that can be filled.

Can you guess what its for? Price range will be around the $50-60 mark

Attachment 82083

plate holder..

what do I win ? :)

I'll buy you a beer ;) come on down to the shop.

I want the mounting hole to be in the extreme right bottom corner when looking at it

Can we see a mockup or a photoshop image?

as soon as i get some other projects cleared up ill have a working prototype.

Wow..........these guys are not fooling around. I expected some Tom-Foolery when the teaser came out. Great work so far! And a mass of feedback..........WoW!

Not related to the 370z but fairly neat I think. Wishbone suspension component for a Yamaha R1 race bike.

https://scontent-b-dfw.xx.fbcdn.net/...94457999_n.jpg

https://fbcdn-sphotos-h-a.akamaihd.n...96918649_o.jpg

Beautiful. Do you make your own vise jaw blanks or order them?

I make my own. I feel its a waste of money to purchase them...despite what ANYONE will tell you. if you have even an hour of free time on the machine you might as well make some jaws.


https://fbcdn-sphotos-d-a.akamaihd.n...10047139_o.jpg

https://fbcdn-sphotos-e-a.akamaihd.n...07334854_o.jpg

Vise jaws dont have to be precise by any means... I have a locating slot on the back and the face that locates against the vise face and vise way are perpendicular. aside from that i run them as fast as possible and dont care about taper or any other "issues"

I have a video cutting the vise jaws.


Okuma Genos M560-V Cnc mill & Gibbscam with Volumill - YouTube