7AT 3.692 Gear Review

1slow370

Its hard to say all i can tell you is it thinks the front wheels are turning faster than the rear wheels by 2 teeth per rev. Its hard to say exactly how the abs and tc are going to react.

Sent from my HTCONE using Tapatalk

__________________
ANSWER PRICE LIST
Answers - - - - - - - - - - - - - - - - $0.75
Answers (requiring thought) - - - - $1.25
Answers (correct) - - - - - - - - - - $12.50

critical

ABS works fine. Just slam on the brakes to see lol.

Cruise control doesn't work, but I think if I clear random O2 sensor codes (complexly unrelated) TC will work. Not bothered to figure out why or if this is the case since I never use it.

__________________
Quaife w/ gears |Stillen Gen 3|SOLD FI Resonated Test Pipes |SOLD FI 18'' | 25row Stillen Race | Progress 35mm/25mm sways | Swifts/Koni|Volk G25's| Stoptech SS lines||SPL Front/Rear Arms|

1slow370

I think he is saying he just swapped a 350z pumpkin in without changing the stub shafts which is going to be 2 teeth off per rev since the 350z's had different stubs

Edit: or wait he owns a 350 so maybe he used a 370 rear in a 350 so it would be off the other way.

__________________
ANSWER PRICE LIST
Answers - - - - - - - - - - - - - - - - $0.75
Answers (requiring thought) - - - - $1.25
Answers (correct) - - - - - - - - - - $12.50

andre12031948

I put a 370's pumpkin into my 350 because it had 4:08 gears. No problem doing it & the mechanic (dealer) didn't mention anything.

I took my 350 pumpkin with 3:90 gears & installed it in my 370. During installation a different mechanic pointed out to me that those rings were spaced a bit different. Since my 370z pumpkin was out already, I gave permission to make the change and see what happens. Result, no abs light but no cruise control. Had no issues with 370 pumpkin into my 350z car.

A day later I drove 3 hours to a track(Atco) just to see/feel the results. Had the car for only 3/4 days, so everything else was completely untouched.

Even with traction problems(water on track) the car pulled like a MF & of course went through the gears really fast. After it (auto left in D) shifted into 2nd. the car was really moving. MPH as high as 107 almost 108. I think that's great pulling power for a stock Z w 1,500 miles. Test pipes + tune 110+ mph ???? Will test the abs after it snows a bit

esfourteen

the manual 350z has a 3.53 final drive, the 370 has a 3.69. small difference, but worth pointing out

__________________
Build Thread | GTM TT Install Thread | Engine Build Thread

visconti

Yes EcuTek can get your CC back

Let me know when your ready !



Sent from my iPhone using Tapatalk

__________________
John@vTune.us
EcuTek Master Pro Tuner

Visconti Tuning Webstore | Support Documents & Downloads

Felix 808

Actually you are geared lower. Higher Ratio #'s = lower gears. Pinion gear gets smaller on numerically higher gear sets

I'm glad I re-read this post, as I was looking into 3.9's for my auto as 4.08's would be too deep for me. After recalculating, there is only 4% difference between the 3.692 & the 3.9's. For the added cost I'm going to go with the 3.692's as they will already be in the low mileage diff I just bought Thanks for saving me a grip of cash

Does anyone have a clear understanding on how the cruise control works in the 370z? Where is it sensing it's reading from? Also is there any speedo/ Odo correction available/ needed?

Thanks again

__________________
Semper Fi

Μολὼν λαβέ

Felix 808

That's 1/2 of the gain right there. 3.53 is only 5% increase while 3.692 is right at about 10% increase. Thanks for pointing that out:

__________________
Semper Fi

Μολὼν λαβέ

andre12031948

If I didn't have my 3:90 gear pumpkin laying around, I would have installed a stock 370z 3:69 gear pumpkin. My car shifted into 5th gear before the end of the 1/4 mile, so the 3:69 gears set up would be perfect/ideal & easy to find & install.

I will make my 3:90 work by tuning & raising the high H.P. point to 7,500 rpm & shifting points apx. 200 rpm. to 7,700 rpm with a redline at 7,800 rpm. It should do very well at the track. Test pipes, maybe better tires plus^^^^^that will put me into the 12.7's/12.8's with stock intakes & stock mufflers. Also it's real fine as a daily street car.

critical

it messes with the cruise control logic. the specifics are on the forum somewhere and possibly in the service manual as well.

__________________
Quaife w/ gears |Stillen Gen 3|SOLD FI Resonated Test Pipes |SOLD FI 18'' | 25row Stillen Race | Progress 35mm/25mm sways | Swifts/Koni|Volk G25's| Stoptech SS lines||SPL Front/Rear Arms|

blueranger

Anyone know other sources besides eBay for a used manual rear diff?

I have been looking for a couple of months on eBay with no luck

__________________
F.I. Stage 1 Twin Turbo #48 | E85 FlexFuel | Built 7AT | F.I. 34 Row Oil Cooler | F.I. Flex Plate | F.I. 19 row Trans Cooler | MT ET Street S/S | ECUTEK Tuned by Seb | RPM Roll Bar

critical

bug all the boosted Z owners

__________________
Quaife w/ gears |Stillen Gen 3|SOLD FI Resonated Test Pipes |SOLD FI 18'' | 25row Stillen Race | Progress 35mm/25mm sways | Swifts/Koni|Volk G25's| Stoptech SS lines||SPL Front/Rear Arms|

Felix 808

You can always call around to junk yards, both local & on the internet. I'll keep an eye out for you

__________________
Semper Fi

Μολὼν λαβέ

megalapagas

Soo just to be on the clear quaife only delivers through one tire while the other rear tire is just dangling not puting power down?? Sorry this whole thing of diff and gears scrambles my head hahahahahaha. So you can get a basis my car is a DD, No track, Ocasional Drag. Also I plan on doing it on a 350Z Diff manual base model to my 370z. I plan on doing the 4.08 gears and just for the benifit of the doubt 4.08 gears are shorter or longer???? Since I plan on adding a big punch to this combo.

__________________
GTM 34 Row Oil Cooler | K&N Drop Ins w/ Z1's Post MAF Tubes | F.I Non-Res'd 2.5" T.P w/ CF CBE | Axis Wheels | Piecing together My Own Custom T4 Top Mount Single Turbo Kit *Still in the works* |

blueranger

You are a cool cat

__________________
F.I. Stage 1 Twin Turbo #48 | E85 FlexFuel | Built 7AT | F.I. 34 Row Oil Cooler | F.I. Flex Plate | F.I. 19 row Trans Cooler | MT ET Street S/S | ECUTEK Tuned by Seb | RPM Roll Bar