|
So my oil pressure is now higher than it was before, at 80C and idle, it sits at 30-33 psi. This is with a Fram oil filter and Mobil 1
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
07-26-2013, 09:01 PM
|
#28 (permalink) |
|
Track Member
Join Date: Mar 2010
Location: Edmonton
Posts: 855
Drives: 10' MB Z34 6MT T/S/N
Rep Power: 23   |
So my oil pressure is now higher than it was before, at 80C and idle, it sits at 30-33 psi. This is with a Fram oil filter and Mobil 1 5w30. This leads me to believe there may have been a small leak ever since I put the oil pressure gauge in and it just recently got bigger. Another good reason to let your engine and oil heat up before driving and let the oil heat ALL the way up before driving it hard.
|
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| DIY: Stillen 19 Row Oil Cooler Install - driver side (stock PS cooler unmoved) | djpathfinder | DIY Section (Do-It-Yourself) | 21 | 11-30-2015 05:47 AM |
| oil pressure build slower with a Z1 oil cooler? | Loki | Engine & Drivetrain | 1 | 04-06-2012 07:48 AM |
| Oil Pressure Gauge Install | spearfish25 | Engine & Drivetrain | 26 | 04-01-2011 04:24 PM |
| oil cooler install (pressure drop) | budz | Engine & Drivetrain | 14 | 07-09-2010 10:35 AM |
| Oil pressure sensor install | binto100 | Engine & Drivetrain | 1 | 05-24-2010 05:03 PM |
15Likes
Threaded Mode
