Plug and Play Remote Start kit for 370z

future370zzz

Ordered the kit a week ago, just got the kit. Neatly boxed and wrapped. I am writing this post after install.

ImageUploadedByTapatalk1372949291.497635.jpg

Comes with 6 pages of color instructions. Take off two pieces of trim, unplug 2 electrical connectors, reconnect, ground, program unit and done. Comes with a hood pin disable switch and toggle switch. I chose to use the toggle switch for easier install.

Install took a total of 40 mins for me because I was in no rush. Cleaned up my car a little and took my time.

For those installing it here are some tips/notes:

- May want to change your key fob lock button to silent ( honks gets annoying)

- ECM electrical connectors are very tight and there is little room to pull the green plug out. There is a small tab behind the plug you need to push while pulling. Wiggling a little while pulling helps.

- Very little tools needed; 10mm socket, small flathead to help with pulling up plugs and drill if you decide to hard mount the toggle switch disabler.

Always wanted remote start but didn't want to change out remotes. This was a plug n play item that if I chose to remove later would very simple. Great product.

__________________