Question about the SRM

JeMo44

I just got my Z this past saturday and I noticed that when I shift gears the rpm goes up from time to time or when I push the clutch in the clutch something somewhat similar happens. Is this normal? I have the SRM on.... Be easy on me guys, I'm new to this bad girl

iceman21_23

SRM= Synchro rev matching basically blips the throttle and eliminates the need for heel toeing, its a feature that i find useful. it essentially blips the gas to match rpm's when shifting gears.

__________________
Zele front bumper cf front lip, Seibon TS Hood, Work GS2, Ings+1 side skirts Takeda CAI Litespeed Exhaust

JeMo44

So I shouldn't be worried about it rev up then, I know it does it when I down shift, but it just feels weird to me when I upshift, it also might be that the car only has 450 miles on it

iceman21_23

its just matching the revs for a smoother shift, shouldn't be worried.

__________________
Zele front bumper cf front lip, Seibon TS Hood, Work GS2, Ings+1 side skirts Takeda CAI Litespeed Exhaust

SS_Firehawk

It will do it on upshifts as well to smooth out the engagement.

Here is a bit of homework for you
2009 Nissan 370Z's SynchroRev Match Explained - Tech Dept. - Car Reviews - Car and Driver

__________________

JeMo44

So it's ok for the clutch to feel a bit hard, its kind of difficult to explain what it feels like but I get the feeling like I have nothing to worry about.

Japanjay

That is why I hate it, I dont like the up control.

dP3NGU1N

You eventually get use to it.

__________________

35% Hooper Optik | Takeda Attack CAI | F.I. HFC | Hotchkis Sway Bar | Stillen 24row | OS Giken Super Lock LSD | TK Shift Knob | EVO-R Carbon Diffuser

gomer_110

The clutch in our cars is notorious for feeling strange compared to other cars but this is normal. You will get used to it.

__________________
'11 370Z Nismo #528 Fast Intentions | Stillen | Motordyne | Uprev | CSF | Zspeed | Z1 Motorsports | AST | Swift | SPC | SPL | Whiteline | Hotchkis | Bride | Schroth | Robispec | Cusco | Nismo | Volk | Forgestar | Hoosier | RJM
'17 Titan Bone Stock

Chuck33079

You can make the clutch feel a little better if you reach up in there and remove the helper spring.

__________________
2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

Haboob

This.

I did this and it was like night and day.

As for the SRM, yes... clutch in and it's still going to raise the RPM. Throwing it into neutral will do the same. Almost got me in trouble once.


They say it doesn't do anything on up shifts, but it sure does hold the RPMs a bit on an upshift.

IDZRVIT

My SRM doesn't do anything when upshifting. I guess I just shift better than some of you guys.

__________________
"America.... still builds rockets!"
Vette: 355 cid, 400 rwhp
'13 CTS-V Coupe: 6.2L LSA, 556HP

theDreamer

It will do something if you are slightly under the RPM range it has calculated for what it thinks you are going to do.
Remember if you are cruising in say 4th and go clutch in, the systems will know 2 things. You are either going up or down so it holds or slightly bumps the RPM to prepare itself. If you go down it can quickly rev up and if you shift up it drops them off.

__________________
theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN
theDreamer's Silvia // URAS // GREDDY
Houston Zs // Facebook // Twitter // Instagram

IDZRVIT

I don't pussy foot around when I shift so the shift is completed in say a 1/4 - 1/2 second. The computer doesn't have time to do anything because the the digital data its presuming, as you note, then collecting actual data, now has to be processed and then work the mechanics of the engine. That will take more than a 1/4 second to complete those steps because nothing in this world is instantaneous. So, if someone is slow to shift, then one might notice an increase in rpm as you and others have noted before the shift is completed but for me I just complete the shift and move on. If I had the time to prove this I would just video the tach on an upshift and see if it moves up i.e. several hundred rpm because thats what it takes to become "noticeable", but its not important enough to me to do so as I'm in the process of putting my retro fit roller motor back into my 'vette. Maybe you or someone else could do this to prove the point? Be sure to complete shifts within say 1/2 second. Anything more is granny shifting.

__________________
"America.... still builds rockets!"
Vette: 355 cid, 400 rwhp
'13 CTS-V Coupe: 6.2L LSA, 556HP

theDreamer

You do know electrons, which is the basis for computation, travel at a much faster rate of speed and are beating you in your shifts. What is probably happening with you is that on your upshifts you are above its 'increase' limit meaning it sees no reason to raise the RPM when you upshift. Different shifting style.

__________________
theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN
theDreamer's Silvia // URAS // GREDDY
Houston Zs // Facebook // Twitter // Instagram