Clutch throwout bearing noise [Sound Clip]

crystalline · 10-17-2013, 02:12 PM

Thread is a little old but I'm going to bump it up and see if you got an answer from the dealer. This noise just started at 30, 000 mi on my car. It sounds exactly the same as your video. I have a 6 puck with lw flywheel and the upgraded csc, so a total different set up making the same noise. Dealer will not even diagnose the issue due to the upgraded clutch. Service advisor was adament that it was the input shaft bearing...

It seems unlikely that the issue has anything to do with my clutch since we have a video of the stock one doing the same thing. What did they end up telling you? Did they repair the issue on your car?

crystalline · 10-17-2013, 11:24 PM

OP indicated to me that the dealer diagnosed the problem as a csc failure. This seems unlikely as the symptoms of a typical failure do not match with this noise. Csc failed on my car thus I upgraded the clutch and csc. Anyone else take a listen to the clip and have any ideas?

lauj · 10-17-2013, 11:58 PM

Quote:

Originally Posted by crystalline

OP indicated to me that the dealer diagnosed the problem as a csc failure. This seems unlikely as the symptoms of a typical failure do not match with this noise. Csc failed on my car thus I upgraded the clutch and csc. Anyone else take a listen to the clip and have any ideas?

I have this noise for about 6 month now. I think is the throw out bearing what causing it. I don't think it harm anything. I think the 350z also have the same issue (correct me if I'm wrong).

firroti · 02-09-2023, 05:57 PM

i just had my clutch replaced. JWT clutch with z1 hd csc and i get this same noise. I thought its part of the break in period but idk. I know this post is old but i cant find answers

10-17-2013, 02:12 PM	#1 (permalink)
crystalline Base Member Join Date: Apr 2011 Location: MA Posts: 143 Drives: 09 Nismo 370z Rep Power: 16	Thread is a little old but I'm going to bump it up and see if you got an answer from the dealer. This noise just started at 30, 000 mi on my car. It sounds exactly the same as your video. I have a 6 puck with lw flywheel and the upgraded csc, so a total different set up making the same noise. Dealer will not even diagnose the issue due to the upgraded clutch. Service advisor was adament that it was the input shaft bearing... It seems unlikely that the issue has anything to do with my clutch since we have a video of the stock one doing the same thing. What did they end up telling you? Did they repair the issue on your car? Last edited by crystalline; 10-17-2013 at 02:19 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Transmission noise (sound like bearing failure)	ronstoppable	Engine & Drivetrain	31	09-12-2013 04:01 PM
bearing whine noise	cossie1600	Engine & Drivetrain	2	03-29-2012 10:47 PM
New flywheel installed... Throwout bearing is 1000x louder... WTF?	atx370z	Engine & Drivetrain	49	10-02-2011 11:34 AM
Ark cbe (sound clip/review)	destinyZ	Intake/Exhaust	11	01-06-2011 07:59 PM
SZ Clutch & Flywheel Upgrades + Bearing!	Seb@SZ	Engine & Drivetrain	86	12-04-2010 07:25 PM

10-17-2013, 11:24 PM	#2 (permalink)
crystalline Base Member Join Date: Apr 2011 Location: MA Posts: 143 Drives: 09 Nismo 370z Rep Power: 16	OP indicated to me that the dealer diagnosed the problem as a csc failure. This seems unlikely as the symptoms of a typical failure do not match with this noise. Csc failed on my car thus I upgraded the clutch and csc. Anyone else take a listen to the clip and have any ideas?

02-09-2023, 05:57 PM	#4 (permalink)
firroti Base Member Join Date: Jan 2023 Location: fl Posts: 3 Drives: 370z m6 Rep Power: 4	i just had my clutch replaced. JWT clutch with z1 hd csc and i get this same noise. I thought its part of the break in period but idk. I know this post is old but i cant find answers