370Z 6mt OEM vlsd

jdmlove · 04-02-2013, 02:04 AM

Hi all, i want to replace my 2007 350Z diff with a 370z 6mt Vlsd diff..

i am going to UAE this month and i will look their. so anyone have pics of how it look like? or a part number written on the pumpkin? how can i know by looks that its for 6mt and its vlsd?

i am only asking because my friend told me that in UAE scrap yards parts already taken out of titled cars!

Tigger · 04-02-2013, 05:59 AM

Why a 370 vlsd? People with the 370 are picking up Quaife limited slips all the time and those were originally designed for the 350. Why not stick to a good aftermarket brand that was intended for your vehicle?

And to not really answer your specific question about fitment.... it may be backward compatible but it is hard to say unless someone else that has done it chimes in.

jdmlove · 04-02-2013, 07:36 AM

^^^ i dont need quafie or cusco, as the VLSD is enough for me. i cant pay 1k+ for lsd.

the 370z ratio is 3.69 while the 350z is 3.5, so its better.

Motion Lab · 04-02-2013, 10:21 AM

Since you have the late model 350z the 370z vlsd from a manual should drop right in if I understand your question correctly. You only need to change when going backwards i.e using the quaife diff made for early model 350z you must change the stub axle to allow for fitment in late model VQHR motors (350z or 370z).

Thanks,
Alex Goodwin
AlexG@motionlabtuning.com

jdmlove · 04-03-2013, 12:30 AM

hi, the 370z pumpkin will directly go in the 350z if its comes with the stub axles, but if i wanna put Quafie LSD i will have to change my stub axles.

L33T Z34 · 04-04-2013, 08:23 PM

Hey JDM Love
You may want to check out your local JDM salvage importer. The '05-'07 Skylines with the VQ35DE engine and the CVT (transmission). Their rear differential has the LOW final drive AND the 350Z stub axles (Right stub = 38220-AR010; Left stub = 38220-AR011).

JDM part number for the entire rear diff: 38301-2C807 (4.363 final drive; has the 350Z/G35 axle flanges)

04-02-2013, 02:04 AM	#1 (permalink)
jdmlove Base Member Join Date: Jun 2010 Location: Bahrain Posts: 222 Drives: HR 350z - 07 M35X Rep Power: 14	370Z 6mt OEM vlsd Hi all, i want to replace my 2007 350Z diff with a 370z 6mt Vlsd diff.. i am going to UAE this month and i will look their. so anyone have pics of how it look like? or a part number written on the pumpkin? how can i know by looks that its for 6mt and its vlsd? i am only asking because my friend told me that in UAE scrap yards parts already taken out of titled cars! __________________

04-02-2013, 07:36 AM	#3 (permalink)
jdmlove Base Member Join Date: Jun 2010 Location: Bahrain Posts: 222 Drives: HR 350z - 07 M35X Rep Power: 14	^^^ i dont need quafie or cusco, as the VLSD is enough for me. i cant pay 1k+ for lsd. the 370z ratio is 3.69 while the 350z is 3.5, so its better. __________________ Last edited by jdmlove; 04-02-2013 at 07:39 AM.

04-03-2013, 12:30 AM	#5 (permalink)
jdmlove Base Member Join Date: Jun 2010 Location: Bahrain Posts: 222 Drives: HR 350z - 07 M35X Rep Power: 14	hi, the 370z pumpkin will directly go in the 350z if its comes with the stub axles, but if i wanna put Quafie LSD i will have to change my stub axles. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Will G37s(coupe) VLSD fit in a 370z?	ryan3994	Engine & Drivetrain	5	03-29-2014 02:56 PM
[FOR SALE] Oem vlsd	M.Bonanni	Parts for sale (Private Classifieds)	11	01-21-2013 01:51 PM
WTT: 6MT VLSD diff w/4.08 for Stock VLSD w/3.69	esfourteen	North East Region	4	05-23-2012 04:07 PM
[WTB] Oem vlsd	Torgant	Parts for sale (Private Classifieds)	4	05-20-2012 06:19 PM
370z vlsd?	ImportConvert	Engine & Drivetrain	1	10-31-2011 12:24 AM

04-02-2013, 05:59 AM	#2 (permalink)
Tigger A True Z Fanatic Join Date: Mar 2013 Location: NM Posts: 8,063 Drives: Awedeeeeee Rep Power: 602	Why a 370 vlsd? People with the 370 are picking up Quaife limited slips all the time and those were originally designed for the 350. Why not stick to a good aftermarket brand that was intended for your vehicle? And to not really answer your specific question about fitment.... it may be backward compatible but it is hard to say unless someone else that has done it chimes in.

04-02-2013, 10:21 AM	#4 (permalink)
Motion Lab A True Z Fanatic Join Date: Jul 2012 Location: Charlotte, NC Posts: 2,676 Drives: Nissan 370Z Rep Power: 17	Since you have the late model 350z the 370z vlsd from a manual should drop right in if I understand your question correctly. You only need to change when going backwards i.e using the quaife diff made for early model 350z you must change the stub axle to allow for fitment in late model VQHR motors (350z or 370z). Thanks, Alex Goodwin AlexG@motionlabtuning.com

04-04-2013, 08:23 PM	#6 (permalink)
L33T Z34 Banned Join Date: Jun 2010 Location: Ahnald, MO Age: 46 Posts: 387 Drives: 09 K51 G C Bw/S 6MT Rep Power: 0	Hey JDM Love You may want to check out your local JDM salvage importer. The '05-'07 Skylines with the VQ35DE engine and the CVT (transmission). Their rear differential has the LOW final drive AND the 350Z stub axles (Right stub = 38220-AR010; Left stub = 38220-AR011). JDM part number for the entire rear diff: 38301-2C807 (4.363 final drive; has the 350Z/G35 axle flanges)