South Bend Flywheel TQ Specs

MJB · 01-13-2013, 02:35 PM

Hey SPOHN, I believe its around 90-95lbs on the flywheel, but you may want to ask Joe. I think my installer used red lock-tite as well.

37Z · 01-13-2013, 05:09 PM

Which Southbend flywheel, Clutch plate,presure plate,CSC release bearing did you go with?

I may be face with replacing my stock CSC bearing, etc next week if not covered under warranty!

OldBoy · 01-14-2013, 10:33 PM

Quote:

Originally Posted by MJB

Hey SPOHN, I believe its around 90-95lbs on the flywheel, but you may want to ask Joe. I think my installer used red lock-tite as well.

Red lock-tite should always be used when installing a flywheel, always.

B&W_Evader · 01-15-2013, 10:33 AM

You may never get them back off if you used the red. I'd use blue if anything.

OldBoy · 01-15-2013, 09:00 PM

Quote:

Originally Posted by B&W_Evader

You may never get them back off if you used the red. I'd use blue if anything.

Never had any problems taking them out. Blue is better than nothing tho.

01-13-2013, 02:35 PM	#1 (permalink)
MJB A True Z Fanatic Join Date: Aug 2011 Location: Tacoma, WA Age: 43 Posts: 1,498 Drives: a POS truck Rep Power: 498	Hey SPOHN, I believe its around 90-95lbs on the flywheel, but you may want to ask Joe. I think my installer used red lock-tite as well. __________________ 09 Nismo #0483 sold. Viper or C7 next time around.

01-13-2013, 05:09 PM	#2 (permalink)
37Z Enthusiast Member Join Date: Jun 2009 Location: Florida Posts: 476 Drives: 370Z MB 6M -sold Rep Power: 265	Southbend Flywheel Which Southbend flywheel, Clutch plate,presure plate,CSC release bearing did you go with? I may be face with replacing my stock CSC bearing, etc next week if not covered under warranty!

01-15-2013, 10:33 AM	#4 (permalink)
B&W_Evader Track Member Join Date: Aug 2011 Location: CA Posts: 972 Drives: slower than before Rep Power: 389	You may never get them back off if you used the red. I'd use blue if anything. __________________ \|RIP\|6spd-sport\|OSG-LSD\|XP8\|RBF600\|Eibach Sways\|RE-71R\|FI-34Row\|Gen3-CAI\|Yaw P.S.\|

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
South Bend DXD Xtreme Duty Clutch and Flywheel + HD Slave Kit	Joe@ZSpeed	Drivetrain/Engine	75	07-14-2017 02:53 PM
South Bend Clutch-bad install	OKC Z	Engine & Drivetrain	23	07-06-2015 07:07 AM
South Bend DXD Flywheel VS 18lb Flywheel Videos	Joe@ZSpeed	Engine & Drivetrain	5	07-12-2012 07:50 AM