|
The high idle is a result of the CEL. Certain CEL's put the engine into a failsafe mode with high idle and restricted timing. You can reset the CEL and
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
11-11-2012, 10:12 PM
|
#8 (permalink) |
|
A True Z Fanatic
 
Join Date: Mar 2009
Location: North East
Posts: 6,203
Drives: 09 370Z Sport M6
Rep Power: 655   |
The high idle is a result of the CEL. Certain CEL's put the engine into a failsafe mode with high idle and restricted timing. You can reset the CEL and you might be good for a little while, check for any exhaust leaks near the cats that might throw off O2 sensor readings.
I had similar issues after installing the Stillen G3's in combination with high-flow cats and cat-back exhaust. Once I got a tune everything was good.
__________________
Hotchkis ARB | Stillen CAI | Art Pipes | Berk CBE | Stillen AP Racing Brakes | AE Performance Oil Cooler | BC Racing ER Coilovers | Doran Control Arms |
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Post sandy gas quality | igota21incher | North East Region | 3 | 01-24-2013 09:28 AM |
| Hurricane Sandy you suck!!!! | Carbon Fiber Element | North East Region | 4 | 10-31-2012 02:34 PM |
| R/T Tuning Closure -- Hurricane Sandy | Erik@RTTuning | R/T Tuning | 1 | 10-31-2012 11:42 AM |
| Intel Sandy Bridge | bigaudiofanat | Wanted | 1 | 04-17-2012 03:02 PM |
| Sandy Surface, what should I use? | pa19103 | Detailing / Washing / Waxing / Cosmetic Maintenance and Repair | 2 | 08-20-2011 11:09 AM |
2Likes
Threaded Mode
