Clutch peddal sticking down and loss of Fluid

Juice14 · 08-07-2012, 11:26 AM

So ive seen some members have had problems with the cluth, slave cylinder, lines getting hot, etc. My problem is a little dofferent and I wanted your imput.

to meke a long story short, My clutch peddal is sticking down, as I check the reservoir, its completly empty. I tried bleeding the lines and it started to work and the peddad started to rais and feel more firm, but couple seconds latter went down again. Now the reservoir had fluid in it but the clutch is sticking down.

My mechanig will take a look at the whole system today to see if there is a leak or what it could be.

Ive been looking around for slave cylinders and only found the ZSC slave cylinder.

what could this be? slave cylinder? master cylinder??? Im guessing its not the clutch return spring...

oh and by the way it doesnt make sense why Nissan would locate this inside the case where it just gets a bunch of heat, not to mention its a part that seems to be moslty plastic.

thanks for your input...

ResIpsa · 08-07-2012, 11:28 AM

Sounds like you have a leak in your system.

Roadster4Us · 08-07-2012, 11:39 AM

This should help.

http://www.the370z.com/engine-drivet...-failures.html

anthonyy · 08-07-2012, 11:43 AM

Quote:

Originally Posted by Roadster4Us

This should help.

http://www.the370z.com/engine-drivet...-failures.html

100%

Juice14 · 08-07-2012, 10:04 PM

oh thanks for the sticky. i guess is more common than i thought. has anyome tried any aftermarket csc? any recommendations?

anthonyy · 08-08-2012, 02:22 AM

z speed csc. I had to get mine replaced under warranty. Hoping it won't happen again...

08-07-2012, 11:26 AM	#1 (permalink)
Juice14 Base Member Join Date: Nov 2011 Location: International Posts: 132 Drives: Red 370Z Rep Power: 13	Clutch peddal sticking down and loss of Fluid So ive seen some members have had problems with the cluth, slave cylinder, lines getting hot, etc. My problem is a little dofferent and I wanted your imput. to meke a long story short, My clutch peddal is sticking down, as I check the reservoir, its completly empty. I tried bleeding the lines and it started to work and the peddad started to rais and feel more firm, but couple seconds latter went down again. Now the reservoir had fluid in it but the clutch is sticking down. My mechanig will take a look at the whole system today to see if there is a leak or what it could be. Ive been looking around for slave cylinders and only found the ZSC slave cylinder. what could this be? slave cylinder? master cylinder??? Im guessing its not the clutch return spring... oh and by the way it doesnt make sense why Nissan would locate this inside the case where it just gets a bunch of heat, not to mention its a part that seems to be moslty plastic. thanks for your input...

08-07-2012, 11:28 AM	#2 (permalink)
ResIpsa Track Member Join Date: Apr 2009 Location: Virginia Posts: 564 Drives: 09 RACING HEN Rep Power: 338	Sounds like you have a leak in your system. __________________ The Reed Law Firm; Michael Fasano VA Attorney and Counselor at Law: A Virginia Traffic, Criminal, and Family Lawyer.https://reedlawva.com/

08-07-2012, 11:39 AM	#3 (permalink)
Roadster4Us A True Z Fanatic Join Date: May 2011 Location: Stafford, VA Posts: 1,328 Drives: 2013 ZL1 Rep Power: 15	This should help. http://www.the370z.com/engine-drivet...-failures.html __________________ Greg 2013 Camaro ZL1

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
clutch sticking after aggressive driving	Pharmacist	Engine & Drivetrain	40	03-03-2013 09:17 AM
Clutch pedel sticking	gthomas	Nissan 370Z General Discussions	1	03-06-2012 04:08 PM
clutch sticking mid release	fosingwo	Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs	7	12-22-2011 04:43 AM
clutch sticking?	Pharmacist	Nissan 370Z General Discussions	32	11-11-2011 08:57 PM
went to dragstrip clutch started sticking	franky2222	Track / Autocross / Drifting / Dragstrip	5	04-23-2011 08:49 PM

08-07-2012, 10:04 PM	#5 (permalink)
Juice14 Base Member Join Date: Nov 2011 Location: International Posts: 132 Drives: Red 370Z Rep Power: 13	oh thanks for the sticky. i guess is more common than i thought. has anyome tried any aftermarket csc? any recommendations?

08-08-2012, 02:22 AM	#6 (permalink)
anthonyy A True Z Fanatic Join Date: Apr 2011 Location: Los Gatos, CA Posts: 1,027 Drives: Lexus CT Rep Power: 16	z speed csc. I had to get mine replaced under warranty. Hoping it won't happen again...