HYPERTECH programmed great, then car no start

SPOHN

Does any lights come on? Does it read no key? Just want to make sure it's not the steering lock being a 09

__________________

TPrelude-370z

Yes the lights come on and it reads no key. Please tell me you have my answer

jpritche

It could be the steering lock failure. Actually, that is exactly what it sounds like.


I would start here. DIY: Replace dreaded steering-lock on 2009s and early 2010s.



P.S. The best thing to do would be to take it to the dealer and not say a word about the hypertech. Then they should be able to tell you if the ecu is bricked. If the ecu is NOT bricked then I would be willing to bet that it is the steering lock.

henry0844

problem is, the dealer can tell if the ecu has been tampered with. so even if he says nothing about the hypertech they will still know that it has been f'ed with. hopefully the ecu can be saved by someone, poor guy is just a victim of an honest mistake.

__________________
2010 PW 370 base+sport 6mt
Stillen g3's/ Berk CBE / Stillen 19 row/ uprev: 308whp 255wtq dyno jet @ specialty z.