Sucks. Well keep it up man.

Try to get in touch with Kano. Talk to him, and see what he advice you.

How do u know Kanoo, u from Bahrain, Kanoo only does his own cars, don't think he deals with other peoples cars, but thanx 4 the suggestion.

I'm not. but I know he's there.

Oh ok, that's cool, still looking for an installer getting tired of this might just sell the cams lol

zuperman, have you checked with this shop? Power Maker DYNO

They show up on the uprev dealers page and I think would not be too far from you. UpRev - Engine Management

Thanx man for helping out, they are basically tuners, they only deal with tuning cars, I was actually going to use their services to uprev my car, heard that they are good and have experience with that

So update, after asking around various places and doing a lot of reading and reaserch, turns out that this is really a 14 to 20 hour job, I was having second doubts about installing it at cuz the guy gave me a sky high rate, I will try to haggle with him, and get a bit lowered price, and install these bad boys after all, even though the install price will be high, but I have to bite the bullet one more time I inched close I can't turn back now lol pluse I can't turn my back on you guys after all of you have been waiting for results. Will go with the high price guy cuz he is the only one who seems to know what he is talking about pluse he has worked with tons of gtr's so he know the basic lay out of the Nissan engine plus he has worked on tons of evos as well

This should get your juices running :D now don't really know how the jun cams will sound but if my car ends up sounding half as mean as that I'll be a happy man, at least even if I get minimum gains I'll enjoy the sound loool pls listen to the sound clips loved them

Nismo Cams Installed - Page 2 - MY350Z.COM Forums

Yes I will pay just for sound mannnnn

i know right :D would rather have gains over sound but hell if i get that sound i wouldnt say no lol

That does sound sick..

U guys are tempting me more lool update will go tonight to check out one more shop will be making my decision of where to insatlla after visiting that shop

I have a hard time believing it takes 14+ hours for this install. ��

It's an easy 12+ on an hr. I suppose the vhr might take a bit more time.

yeh app 12 hours 14 if your gonna take your time, it is more complicated on your car with the vvel and stuff

anxious for results.. get these things installed already! :tup:

Lool me to, don't worry guys will have an answer for you with regards to install early this week

Sick!!!!!!!!!!!!!

After looking at the Nismo cams on the 350 I defiantly see what's involved

So what do you think is it a risky job? But the 350 is a bit different than the 370 isn't it, shops here have a lot of experience with 350 but none so ever with 370 will that help?

It doesn't seem risky IMO but im not all sure of what's involved with the VVEL. It would seem as long as the VVEL control module is taken off and reinstalled carefully there would be no issues.

That's my main issue will they take care of that and be carfule I mean even if I tell them will they, that's my only concern

I've been looking at some video of the VVEL and it really is a simple mechanical piece. Probably not much more than a bolt on affair which still requires proper care.

According to AllData it's actually a 16 hour job as per their time guide. 16.3 to be exact.

Yea I know. I already corrected myself a few post later. Read threw please.

16hr X $100 = $1600 for labor.
$700 for the JUN cams.
$250 for a Uprev re-tune
Not to mention possible $$ for new springs

~$2550 total.

For me to justify this mod, minimum gain of +20WHP is a must.

Ok guys found an install car going under the knif this week

I know but I figured I would throw real times into the discussion as everyone is using guesses and approximations, just trying to help a little.

I'm not extremley familiar with AllData and the time guide they use but if that is warranty time as per Nissan than getting an outside shop to do that for an aftermarket cam install is a steal. Normally customer pay is 1.5x warranty so that would be 24.5 hours for this job, assuming AllData uses warranty times and there are no addition op codes for this job.

I'd like to have this mod also. But I know one day Ill be FI (TT) wit built motor. Probably best to wait then. Being the motor will be tore apart anyways theres really not much add cost in doing this.

:tup:

Can't wait to see results

Sick! Gotta see those sound clip vids of before and after...... or....... At least after!

I'm in for videos.

Congrats!

But.. baseline dyno???

You really need that to determine anything!

Cams=:yum:

I already have a base line will dyno again before cams get slapped on and after dyno for sure as well as before and after sound clips hope all goes well with the install wish me luck guys

Good Luck man. This company better be forever grateful to you cause if this works and makes some decent power there gonna make some serious money.

If you net even a small gain i'll get these as part of this winters build up and group buy should go into effect ^__^

thanx guys, hope they really yeild good gains im expecting at least 15hp pluse according to JUN