stock clutch very fragile?

ImportConvert

I was under the impression that the stock clutches in our cars could handle some serious abuse. Then I came across this...

A few launches and its slipping ?!?

http://www.370z.com/M agazineArticles/tabid/57/articleType/ArticleView/articleId/65/PageID/211/Testing-JWTs-Nissan-370Z-Ultra-Light-Flywheel.aspx

SPOHN

Link is not working.

But I feel our clutches are great. But if your referring to drag racing (which is barbaric IMO) the stocker is not going to hold up to hard abuse such as launches. I have nearly 10K miles with four track days on my it seems great.

__________________

ImportConvert

Apparently that link is blocked. Basically, it's a JWT lightweight fly-wheel review, and it was done by "three seventy zee .com". They said the stocker slipped after just a couple of launches and looked glazed. I don't expect the OEM clutch to get along with DR's and redline launches for long, but it should handle THAT.

Copy and paste my link into your browser and it will work. I had to add a space, so you can't click. Copy/paste.

Lug

I had no idea the barbarians even had cars!

__________________
keep Chubbs in your pocket - Chubbs

SPOHN

Oh... they do

__________________

SPOHN

They should of swapped the clutch if there were already doing the the flywheel. I can't wait to do mine. Still hope it hangs in there a little longer.

__________________

ImportConvert

They did. Having any trouble with your clutch, or just knocking on wood?

SPOHN

No trouble at all. Just curious how long it might last from all the tracking. But I don't care either.

__________________

m4a1mustang

Get the clutch heated up enough and it's going to slip. Pretty easy to do with the stock clutch at the drag strip.

And usually the people that don't like drag racing are the ones that have never done it or can't cut good 60' times.

__________________
- Steve

Zs & Coffee - Saturdays at 10AM in Fairfax, VA and Columbia, MD (Click the banner!)
LIKE us on Facebook!

Skeeterbop

I've actually overheated my clutch at the drag strip once. I was slipping the clutch some to hold me in place in the staging lights (track is a little uphill). Needless to say, I overheated the clutch and it slipped horribly. After letting it cool off though it was fine the rest of the night after i changed what i do when staging. That is the only time it has slipped since i bought the car.

__________________
Srenity: "Yeah no rest needed to spread the love when your 20 that's for sure...."

Dembflyr

Mine has been holding up fine since the TT install. Originally my boost was creeping up to near 13 psi due to improper watergate install on my part.

That was the only time I noticed any slip. Even then it was only when I was at highway speeds and then accelerating in a higher gear.

I have never done a really hard launch though. My guess is that it wouldn't hold up well with that abuse.

I am actually impressed with it so far.

__________________
2012 G37S Sedan 6MT - Project Practicality

2009-6MT-Sport/Touring-Dembflyr's Journal-TT Build Thread-CAR IS SOLD

SPOHN

NIce to hear

__________________

ImportConvert

+1

USMCASA

i currently have 85k on the odo, original clutch, launch it hard (though not drag racing it) and doesn't slip one bit. if its slipping someone probably doesn't know how to drive a manual correctly because i borderline abuse my car daily and its working just fine. ***knocks on wood***

Alchemy

yeah, they are called Mustangs

Wow 85k glad to hear the clutch is still good

Im at about 32k and I havent had ANY clutch problems at all. I dont drag race but it gets its share of abuse. Never any slippage. My trans is a slightly different story though

__________________
Ryan
314WHP | 260LB-FT | STILLEN | KONI | SWIFT | STOPTECH | Z1 | PROJECT MU | CNT | UPREV | FORGESTAR | BRIDGESTONE | PWJDM | ENEOS | MOTUL