|
Having another issue. This time everything was running sweet until I had the Greddy Profec boost controller installed just yesterday. First issue is, even with the boost controller switched off,
|
|||||||
 |
|
|
LinkBack | Thread Tools | Display Modes |
08-12-2018, 05:01 AM
|
#1 (permalink) |
|
Track Member
Join Date: Jul 2015
Location: South Australia, Austra
Posts: 917
Drives: 15' 370Z A/T AMM TT
Rep Power: 24   |
Lean Spike on bank 1 - WOT after Boost Controller install
Having another issue.
This time everything was running sweet until I had the Greddy Profec boost controller installed just yesterday. First issue is, even with the boost controller switched off, I am still seeing 10.2-11.2psi boost. I don't know what my base wastegate pressure was set to, but surely it the installer did not set it this high. Second issue, after the boost controller was installed, I am getting a lean spike on the Bank 1 AFR graph mid-way through a WOT pull. Please see image below.  Is anyone able to explain why that is occuring under WOT after the boost controller was installed? Would a bad or incorrect boost controller install cause such a blip? Everything was fine before it was installed. ;( |
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| HELP having issues on bank 2 lean | GuiLLoZ | Engine & Drivetrain | 8 | 01-07-2020 09:04 PM |
| P0174 system bank 2 too lean, air filter | coffeebob | Engine & Drivetrain | 5 | 05-19-2017 06:23 AM |
| [FOR SALE] HKS EVC6 Boost controller - Controller + harness only | NissanTracker | Parts for sale (Private Classifieds) | 1 | 05-11-2017 03:35 PM |
| Po174 bank 2 lean | Elmo370z | Engine & Drivetrain | 2 | 12-13-2014 08:45 PM |
| Fuel system running lean on bank 1 & 2 | Icebrand | Engine & Drivetrain | 13 | 06-16-2014 07:35 PM |
Linear Mode
