View Single Post
Old 08-12-2018, 05:01 AM   #1 (permalink)
shadow85
Track Member
 
Join Date: Jul 2015
Location: South Australia, Austra
Posts: 912
Drives: 15' 370Z A/T AMM TT
Rep Power: 24
shadow85 has a reputation beyond reputeshadow85 has a reputation beyond reputeshadow85 has a reputation beyond reputeshadow85 has a reputation beyond reputeshadow85 has a reputation beyond reputeshadow85 has a reputation beyond reputeshadow85 has a reputation beyond reputeshadow85 has a reputation beyond reputeshadow85 has a reputation beyond reputeshadow85 has a reputation beyond reputeshadow85 has a reputation beyond repute
Default Lean Spike on bank 1 - WOT after Boost Controller install

Having another issue.

This time everything was running sweet until I had the Greddy Profec boost controller installed just yesterday.

First issue is, even with the boost controller switched off, I am still seeing 10.2-11.2psi boost. I don't know what my base wastegate pressure was set to, but surely it the installer did not set it this high.

Second issue, after the boost controller was installed, I am getting a lean spike on the Bank 1 AFR graph mid-way through a WOT pull. Please see image below.



Is anyone able to explain why that is occuring under WOT after the boost controller was installed? Would a bad or incorrect boost controller install cause such a blip? Everything was fine before it was installed. ;(
shadow85 is offline   Reply With Quote