what can kill the cruise control?

Knio · 03-24-2013, 03:37 AM

From the service manual, not sure if this helps:

CANCEL OPERATION
When any of following conditions exist, cruise operation will be canceled.
• CANCEL switch is pressed
• More than 2 switches at ASCD steering switch are pressed at the same time (Set speed will be cleared)
• Brake pedal is depressed
• Clutch pedal is depressed or gear position is changed to neutral position. (M/T models)
• Selector lever is the N, P, R position (A/T models)
• Vehicle speed decreased to 13 km/h (8 MPH) lower than the set speed
• TCS system is operated

When the ECM detects any of the following conditions, the ECM will cancel the cruise operation and inform
the driver by blinking indicator lamp.
• Engine coolant temperature is slightly higher than the normal operating temperature, CRUISE lamp may
blink slowly.
When the engine coolant temperature decreases to the normal operating temperature, CRUISE lamp will
stop blinking and the cruise operation will be able to work by pressing SET/COAST switch or RESUME/
ACCELERATE switch.
• Malfunction for some self-diagnoses regarding ASCD control: SET lamp will blink quickly.
If MAIN switch is turned to OFF while ASCD is activated, all of ASCD operations will be canceled and vehicle
speed memory will be erased.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
90 mph max cruise control?	Santent	Nissan 370Z General Discussions	30	02-14-2021 07:56 PM
Cruise control not working.	mrarroyo	Engine & Drivetrain	23	04-17-2014 01:29 PM
Cruise Control	Trebor3	Nissan 370Z General Discussions	13	04-21-2011 07:26 PM
Cruise control?	rambunctious	Exterior & Interior	3	03-22-2011 07:23 PM
Intelligent Cruise Control (ICC)	badair	Nissan 370Z General Discussions	13	09-25-2010 12:40 PM

03-24-2013, 03:37 AM	#15 (permalink)
Knio Base Member Join Date: May 2011 Location: Palo Alto, CA Posts: 141 Drives: 40th Rep Power: 15	From the service manual, not sure if this helps: CANCEL OPERATION When any of following conditions exist, cruise operation will be canceled. • CANCEL switch is pressed • More than 2 switches at ASCD steering switch are pressed at the same time (Set speed will be cleared) • Brake pedal is depressed • Clutch pedal is depressed or gear position is changed to neutral position. (M/T models) • Selector lever is the N, P, R position (A/T models) • Vehicle speed decreased to 13 km/h (8 MPH) lower than the set speed • TCS system is operated When the ECM detects any of the following conditions, the ECM will cancel the cruise operation and inform the driver by blinking indicator lamp. • Engine coolant temperature is slightly higher than the normal operating temperature, CRUISE lamp may blink slowly. When the engine coolant temperature decreases to the normal operating temperature, CRUISE lamp will stop blinking and the cruise operation will be able to work by pressing SET/COAST switch or RESUME/ ACCELERATE switch. • Malfunction for some self-diagnoses regarding ASCD control: SET lamp will blink quickly. If MAIN switch is turned to OFF while ASCD is activated, all of ASCD operations will be canceled and vehicle speed memory will be erased.