New to Forum and need help with Diff issue

[KusoSama]

Not sure if you see my signature but I drive on a 350 diff. I love it compared to the OEM 370 3.69 diff.

The swap was pretty easy for my mechanic friend who got my diff in his 350 and buying a 350 diff and swapping guts would be cheaper I bet than buying a 370 diff if you could find one used.

Either way I'm curious if the OP has resolved his issue and how he went about it.

[L33T Z34]

Capt YanX
If you got deep pockets, this is what I would order up:

1) A EURO spec differential housing (pumpkin): 38301-EH53E (this rear diff has fins in the cast iron bottom, never seen this on any other R200V before)
$1,800+

2) Rear diff breather (this has to be pressed in): 38356-JL00A $5+

3) Nismo rear diff AL finned rear cover 38351-350DK $125+

4) Silicone vac hose 6mm for the diff breather ~ 1.5ft $7+

5) OSG Super Lock LSD: D-NB102061405-S $1,400+

6) An additional LEFT flange for the OSG LSD: 38220-JK01B $140

7) Sensors, anti-skid rear (if needed?): L = 47901-1BB1A; R = 47900-1BB1A
$180ea

8) Nissan Frontier final drive gear $500+
(3.916 = 38100-0B66A; 4.083 = 38100-0C760; 4.363 = 38100-0C860)

9) Diff assembly by professional trans/rear end shop $300+

10) SPL rear differential bushings $165+

After this is all assembled and installed your looking at a bill over $$$five large$$$.

[capt_yanx]

Originally Posted by KusoSama

Not sure if you see my signature but I drive on a 350 diff. I love it compared to the OEM 370 3.69 diff.

The swap was pretty easy for my mechanic friend who got my diff in his 350 and buying a 350 diff and swapping guts would be cheaper I bet than buying a 370 diff if you could find one used.

Either way I'm curious if the OP has resolved his issue and how he went about it.

Thanks all for the input and ideas! Unfortunately no, I've not been able to resolve the issue mainly becuase I've been out of town and haven't been able to talk to my mechanic about it. But all the input so far has been fanastic. I'll defintly let you all know how it turned out. Any other ideas are welcome!