Clutch pedal too soft/no feel? Remove the helper spring!

adampetrasek

I honestly only used a very long set of needlenose pliers. Something like the straight pliers here...

and a scrap piece of wooden closet rod to push down on the clutch to release the pressure from the spring. That way i didn't have to wedge myself under the dash too much.

I used the long pliers to pull the retaining ring. Then pushed in the clutch. Again with the pliers, from the right side i pushed the pin to the left side, then grabbed the pin and pulled it the rest of the way from the left side. It was a little more complicated, once i got the replacement spring, to put everything back together because of the spring making it a bit harder to line everything up perfect. but not too hard.

__________________
370Z Photo Log | Flickr | AdamPetrasek.com