Sticky: (Official) 370Z Clutch Pressure (CSC) Failures

JARblue · 01-17-2015, 10:45 PM

Just follow the FSM for transmission removal. There's a variety of sensors, some of which can be a pain. Pretty straightforward all things considered. It just takes a while.

Rangerz · 01-17-2015, 11:05 PM

Look up DJ Todds DIY it was helpful when I did mine. Cranck sensor bolt is the hardest to get at mark your drive shaft flages so it goes back the same as you took it off. The transmission is actualy pretty light about 80 lbs or so. I rented a puller from autozone...I had to file the back side of the fingers slightly to get it to go in. FYI the fluwheel bolt are a #40 star bit I think, star bit for sure that size may be off. Have a good torque wrench available take your time and have fun. It not that bad just takes some time to take off all the crap to get at what you need.

01-17-2015, 10:45 PM	#1 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 45 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684442	Just follow the FSM for transmission removal. There's a variety of sensors, some of which can be a pain. Pretty straightforward all things considered. It just takes a while. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

01-17-2015, 11:05 PM	#2 (permalink)
Rangerz Enthusiast Member Join Date: Jun 2013 Location: Northern Utah Age: 61 Posts: 476 Drives: 2012 370 Nismo Rep Power: 14	Look up DJ Todds DIY it was helpful when I did mine. Cranck sensor bolt is the hardest to get at mark your drive shaft flages so it goes back the same as you took it off. The transmission is actualy pretty light about 80 lbs or so. I rented a puller from autozone...I had to file the back side of the fingers slightly to get it to go in. FYI the fluwheel bolt are a #40 star bit I think, star bit for sure that size may be off. Have a good torque wrench available take your time and have fun. It not that bad just takes some time to take off all the crap to get at what you need. __________________ Stillen Gen III/ NST/ Fast Intentions Non-Res HFC & 12" Resonated CF TDX/ Setreb series 9 OC/ SPL upper control arms/ Whiteline front & rear swaybars/ Uprev tuned by Seb@specialtyZ/ 319HP 262TQ/ Z1 PS Cooler/ Z1 SS Premium break lines/ CJM Road Race pump/Carbotech F:XP10 R:XP8 Nismo OC DIY

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[STICKY] How much did you pay for your 370Z? (Australian Version) [STICKY]	AK370Z	Australia/New Zealand	155	03-20-2021 07:35 AM
Sticky: 370Z Transmission Failures (6MT)	DIGItonium	Engine & Drivetrain	104	02-25-2021 10:19 AM
[FOR SALE] 370z clutch, flywheel & pressure plate	40flash	Parts for sale (Private Classifieds)	2	06-11-2012 08:10 AM
CSC Acting UP? Sticky Clutch captured on video.. help?	GonGo	Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs	7	12-23-2011 09:33 PM
370Z flywheel, pressure plate & Clutch disc	40flash	Parts for sale (Private Classifieds)	2	07-23-2010 07:03 AM