Nissan 370Z Forum
Page 59 of 122 « First 9495758 59 606169109 Last »
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Engine & Drivetrain (http://www.the370z.com/engine-drivetrain/)
-   -   Sticky: (Official) 370Z Clutch Pressure (CSC) Failures (http://www.the370z.com/engine-drivetrain/25007-sticky-official-370z-clutch-pressure-csc-failures.html)

eastwest2300 07-07-2015 12:47 PM
Quote:
Originally Posted by enguyen88 (Post 3249552)
I posted it to reddit already. It's a joke it went out with less than 500 miles on it. You'd think after years of replacing this part Nissan would get the hint.
daaaaaaaaamn, thats crazy bro. wow.

MagmaRed370z 07-07-2015 01:09 PM
Quote:
Originally Posted by enguyen88 (Post 3249552)
I posted it to reddit already. It's a joke it went out with less than 500 miles on it. You'd think after years of replacing this part Nissan would get the hint.
Please post it everywhere in the Nissan FB page.

ShutokuZ 07-07-2015 01:24 PM
I have been making snide CSC comments to each of Nissan's FB posts, but cannot get them to reply. They reply to other comments about how they like the cars or how good they are, but not on the failure comments......

MagmaRed370z 07-07-2015 01:33 PM
yeah I have been bombarding them with CSC failures comments and they have replied to like 2 of them with the same sh*tty response "Have you taken it to the dealer for a diagnostic blah blahhhh"

ShutokuZ 07-07-2015 01:41 PM
Quote:
Originally Posted by schellingr (Post 3249663)
yeah I have been bombarding them with CSC failures comments and they have replied to like 2 of them with the same sh*tty response "Have you taken it to the dealer for a diagnostic blah blahhhh"
I see that the Reddit post has been posted to Nissan FB. Was that you?

eastwest2300 07-07-2015 02:03 PM
Quote:
Originally Posted by ShutokuZ (Post 3249657)
I have been making snide CSC comments to each of Nissan's FB posts, but cannot get them to reply. They reply to other comments about how they like the cars or how good they are, but not on the failure comments......
:ugh2::ugh2:

Fountainhead 07-07-2015 02:19 PM
Nissan FB will remove you if you post negative comments.
But I did anyway!

eastwest2300 07-07-2015 02:31 PM
Quote:
Originally Posted by Fountainhead (Post 3249697)
Nissan FB will remove you if you post negative comments.
But I did anyway!
Man, this is ridiculous.. They are literally doing anything and everything to wipe their hands of this problem.

Zbrah 07-07-2015 02:36 PM
Quote:
Originally Posted by eastwest2300 (Post 3249702)
Man, this is ridiculous.. They are literally doing anything and everything to wipe their hands of this problem.
More reason why people should file claims on NHTSA first then hit them up on fb with a link to the complaint, without it your comments don't hold much weight and they just think you're trolling.

MagmaRed370z 07-07-2015 03:43 PM
Quote:
Originally Posted by ShutokuZ (Post 3249671)
I see that the Reddit post has been posted to Nissan FB. Was that you?
nope, that was somebody else.

MagmaRed370z 07-07-2015 03:43 PM
Quote:
Originally Posted by Zbrah (Post 3249708)
More reason why people should file claims on NHTSA first then hit them up on fb with a link to the complaint, without it your comments don't hold much weight and they just think you're trolling.
:iagree:

Everybody please file a complaint here: https://www-odi.nhtsa.dot.gov/Vehicl...nt/index.xhtml


Will somebody please re-confirm that this is the correct link?

Zbrah 07-07-2015 05:04 PM
Quote:
Originally Posted by schellingr (Post 3249779)
:iagree:

Everybody please file a complaint here: https://www-odi.nhtsa.dot.gov/Vehicl...nt/index.xhtml


Will somebody please re-confirm that this is the correct link?
Link works for me :tup:

KoolKarmaJoe 07-07-2015 05:06 PM
Quote:
Originally Posted by KoolKarmaJoe (Post 3249883)
My Z with busted OEM CSC! Being delivered to AAM Competition. On a good note, my Z is lowered and with the help of two small 1" x3" boards was able to get on flatbed without incident. Only had 1/4" clearance!

Sent from my XT1254 using Tapatalk

KoolKarmaJoe 07-07-2015 05:09 PM
Quote:
Originally Posted by KoolKarmaJoe (Post 3249888)
My Z with busted OEM CSC! Being delivered to AAM Competition. On a good note, my Z is lowered and with the help of two small 1" x3" boards was able to get on flatbed without incident. Only had 1/4" clearance!

Sent from my XT1254 using Tapatalk
[IMG]http://images.tapatalk-cdn.com/15/07/07/c7978dec040d164c449ef6ab656f7252.jpg[/IMG

Sent from my XT1254 using Tapatalk

KoolKarmaJoe 07-07-2015 05:09 PM
Quote:
Originally Posted by KoolKarmaJoe (Post 3249894)
[IMG]http://images.tapatalk-cdn.com/15/07/07/c7978dec040d164c449ef6ab656f7252.jpg[/IMG

Sent from my XT1254 using Tapatalk
http://images.tapatalk-cdn.com/15/07...a4ee60b32a.jpg

Sent from my XT1254 using Tapatalk


All times are GMT -5. The time now is 03:54 PM.
Page 59 of 122 « First 9495758 59 606169109 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2