New Engine Noise post-Oil Cooler Install

Originally Posted by spearfish25

So why would my PS pump make noise if I've bled the system? Just the added strain of pumping fluid through a 9-row cooler rather than a smooth tube with fins attached (the stock POS)? I'm hoping the last two sentences in the attached service manual clipping are the explanation. I followed the priming instructions in the service manual (turning lock to lock) and there aren't any more air bubbles coming out. It took about a quart to refill the PS system. What makes no sense is that the manual says the system takes 1 1/8 quarts and I've now added a new, somewhat larger cooler. Unless there is some retained fluid from the drain, I don't know why I only fit 1 quart. Annoying...

Originally Posted by Modshack

Try it again...Whenever I've purged PS systems I've had both wheels off the ground and cycled things left and right several times with no load on them...