370Z clutch line restriction

fstrnldr · 03-16-2010, 12:29 AM

Quote:

Originally Posted by Zat_Zuma

Not as easy to drill out the restriction. Not enough material to ensure a proper seal with the flare connections on the clutch line.

Haven't measured the connectors yet to know what size or thread they are yet and yes, it would have to be a brake line type union with the proper flare connection fittings to prevent leakage.

They will either be 10mm or 12mm they are "measured" by the wrench size used on them. I'm guessing 10mm by the rest of the clutch system. and like i said hit up and auto parts store and ask for a brake union fitting.

BRAKELINEUNION - Dune Buggy Parts, Sandrail Parts, VW Parts - MooreParts.com something like that.

90412-10144 Toyota part number if you must have the 6mm hole for the mounting tab.

'10Anamoly · 09-02-2010, 08:34 AM

I believe the Z1 and GTM clutch lines eliminate this section of tubing completely so shouldn't that restriction be gone if you upgrade the clutch line?

09-02-2010, 08:34 AM	#2 (permalink)
'10Anamoly Track Member Join Date: May 2010 Location: GA Posts: 882 Drives: 2010 370Z BS M6 Rep Power: 17	I believe the Z1 and GTM clutch lines eliminate this section of tubing completely so shouldn't that restriction be gone if you upgrade the clutch line? __________________ 2013 Ford Mustang GT 374rwhp, 360rwtq SAE / GT500 Axle-Backs / Brembo Pack / Track Pack / Recaros / 6spd

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NIS-1350SBLK 10122 08-09 Nissan 370Z special line front	TipsZ	Brakes & Suspension	9	02-10-2010 02:21 PM
inside line mustang GT vs 370z 03.11.09	mattkim85	Nissan 370Z General Discussions	41	06-20-2009 09:36 PM
GT Motorsports: Stainless Steel Braided Clutch Line	George@GTM	Suspension/Brakes	3	02-17-2009 04:56 PM
370Z Clutch vs. 350Z Clutch	cheeyo	Nissan 370Z General Discussions	8	01-28-2009 05:48 PM