clutch flexible line change

runwhatyabrng

I did manage to change the line, without taking the drivers side cat out: what a bear to do: (some pics attached)

-first unclip the hardline out of the plastic clip
-remove the spring clip that holds line on the bracket
-lower the hard line through the bracket so that you can access the flare nut from bellow
-vice grip on metal body of flex line and 10mm flare nut wrench on flare nut
-swap the insulation to new hose
-install new flex line
-put back spring hold down clip, I used a 24" prybar through lower suspension arm and pushed/pried it in that way

Attached Images

	plastic hold down clip.jpg (95.8 KB, 21 views)
	Vice gip and flare nut wrench2.jpg (154.3 KB, 23 views)
	Insulation on new hose2.jpg (212.4 KB, 23 views)
	Prybar to secure spring clip2.jpg (171.1 KB, 21 views)