|
Okay guys I tried to do a little troubleshooting on the pins connecting to the ECM, and have 12 volts going from pin 8 but pin 1 and 13 reading
|
|||||||
 |
|
|
LinkBack | Thread Tools | Display Modes |
01-31-2023, 08:55 PM
|
#1 (permalink) |
|
Base Member
Join Date: Dec 2021
Location: Oahu
Posts: 22
Drives: 09 Nissan 370z 6sp
Rep Power: 3  |
checking power from ecm connector (help please) P1606
Okay guys I tried to do a little troubleshooting on the pins connecting to the ECM, and have 12 volts going from pin 8 but pin 1 and 13 reading 0 volts. Also check the resistance on pin 11 and read 14.58 ohms, and 0 on pin 24. I am fairly new to these kind of testings I was taking this observations from our earlier post, I'll attach his reply below. Do you think my ECM isn't getting power I do have code p1606 and u1003, any help is appreciated greatly!
 benelli wallpaper
|
|
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| How to clear p1606 permanent code? | Snusk | Engine & Drivetrain | 0 | 11-17-2022 12:06 PM |
| Throwing a p1606 code, is there supposed to be another metal connector on bottom left | Snusk | Engine & Drivetrain | 0 | 10-11-2022 10:20 PM |
| P1606 | bunk | Engine & Drivetrain | 27 | 10-02-2022 03:12 PM |
| P1606 VVEL issue/code | Carbon_z | Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs | 42 | 06-16-2020 07:56 PM |
| U1024 and P1606 | khtresaq | Engine & Drivetrain | 1 | 09-06-2019 12:37 PM |
Linear Mode
