|
Check for deformation or damage of drive plate (A/T models) or flywheel (M/T models). CAUTION: • Never disassemble drive plate (A/T models) or flywheel (M/T models). • Never place drive
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
09-11-2022, 12:17 PM
|
#3 (permalink) |
|
Track Member
Join Date: Jan 2017
Location: Vancouver, BC
Posts: 805
Drives: 17' 370Z Nismo
Rep Power: 40656   |
Check for deformation or damage of drive plate (A/T models) or flywheel (M/T models).
CAUTION: • Never disassemble drive plate (A/T models) or flywheel (M/T models). • Never place drive plate (A/T models) or flywheel (M/T models) with signal plate facing down. • When handling signal plate, take care not to damage or scratch it. • Handle signal plate in a manner that prevents it from becoming magnetized. Flywheel (M/T models) • Ensure the dowel pin (1) is installed in the crankshaft. 4 : Rear oil seal • When installing flywheel (3) to crankshaft (2), be sure to correctly align crankshaft side dowel pin and flywheel side dowel pin hole (A). It's been done incorrectly before! |
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 370Z won’t start! Electrical Lockout | Little boi | Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs | 5 | 02-27-2023 12:00 AM |
| Electronics won’t let me start my Z and OBD port and ECU won’t connect. Need a mechan | osburnrs | Engine & Drivetrain | 34 | 03-30-2020 07:43 AM |
| 370Z Nismo, engine stops and won’t start | Morfiy | Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs | 3 | 05-01-2019 11:45 AM |
| 2012 nismo 370z won’t start after gascap change | Datnismo3323 | Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs | 4 | 03-03-2018 12:15 AM |
| Car won’t start | Zthirty4NISMO | Nismo 370Z | 9 | 08-03-2016 06:35 PM |
1Likes
Threaded Mode
