VQ37 VHR NA rebuild suggestions.

jakesktm · 03-10-2021, 09:08 PM

I wish it wasn't the case but she ran crap oil in it for too long and ran it dry before I came along and figured out the oil consumption issue.

Got the following quote from a reputable shop:

The cost for the labor and services of our VQ engine builds is about $5,800, which does NOT include any parts. Here's the breakdown of what is included in the $5,800:
Engine tear down and assembly = $3,500
Engine removal and installation = $1,500
Block machining (w/ torque plate) = $550
Rotating assembly balancing = $250

WPC treatment of the entire engine is $2,300. Includes the block, crank, pistons, piston pins, piston rings, rods, cams, valve springs and oil pump gear. So you can add up the parts you'd like to use in your engine (OE or aftermarket) and come up with a pretty close estimate.

I think that quote is very high, and cost prohibitive for us at the moment. That bottom line looks around $8k plus

Spooler · 03-10-2021, 10:06 PM

Quote:

Originally Posted by jakesktm

I wish it wasn't the case but she ran crap oil in it for too long and ran it dry before I came along and figured out the oil consumption issue.

Got the following quote from a reputable shop:

The cost for the labor and services of our VQ engine builds is about $5,800, which does NOT include any parts. Here's the breakdown of what is included in the $5,800:
Engine tear down and assembly = $3,500
Engine removal and installation = $1,500
Block machining (w/ torque plate) = $550
Rotating assembly balancing = $250

WPC treatment of the entire engine is $2,300. Includes the block, crank, pistons, piston pins, piston rings, rods, cams, valve springs and oil pump gear. So you can add up the parts you'd like to use in your engine (OE or aftermarket) and come up with a pretty close estimate.

I think that quote is very high, and cost prohibitive for us at the moment. That bottom line looks around $8k plus

That is cheap. That is not even going through the heads. Like I said, junk yard motor is your best option.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Caliper rebuild	bunk	Brakes & Suspension	8	02-06-2019 05:01 PM
N/A Rebuild	SharkBite	Tuning	33	06-09-2015 01:56 AM
Gym Rats enter! Suggestions Suggestions!	Asheth	The Lounge (Off Topic)	50	04-18-2013 04:36 PM
KW coilover rebuild?	corbin09	Brakes & Suspension	0	05-30-2012 03:22 PM
if you rebuild it, um.. they will come.	Danny3.7	The Lounge (Off Topic)	23	11-02-2010 12:19 AM

03-10-2021, 09:08 PM	#1 (permalink)
jakesktm Base Member Join Date: Oct 2017 Location: California Posts: 8 Drives: 370 Rep Power: 9	I wish it wasn't the case but she ran crap oil in it for too long and ran it dry before I came along and figured out the oil consumption issue. Got the following quote from a reputable shop: The cost for the labor and services of our VQ engine builds is about $5,800, which does NOT include any parts. Here's the breakdown of what is included in the $5,800: Engine tear down and assembly = $3,500 Engine removal and installation = $1,500 Block machining (w/ torque plate) = $550 Rotating assembly balancing = $250 WPC treatment of the entire engine is $2,300. Includes the block, crank, pistons, piston pins, piston rings, rods, cams, valve springs and oil pump gear. So you can add up the parts you'd like to use in your engine (OE or aftermarket) and come up with a pretty close estimate. I think that quote is very high, and cost prohibitive for us at the moment. That bottom line looks around $8k plus