|
That's the back side I believe the relay you are looking for is inside the unit and requires you to take it apart. Pretty sure it's a micro size solid-state
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
09-03-2020, 07:52 PM
|
#3 (permalink) |
|
A True Z Fanatic
Join Date: Aug 2009
Location: In the D
Posts: 3,732
Drives: v8 74 260z ;)
Rep Power: 7252   |
That's the back side I believe the relay you are looking for is inside the unit and requires you to take it apart. Pretty sure it's a micro size solid-state relay. On the 350 they clipped in and they PROBABLY haven't changed it. Good luck figuring out which one it is as there is no diagram and it's board triggered. Gone have to pull and cycle test each one. Or get a known good salvage ipdm and swap them all. It could have changed to soldered relays so do at your own risk
__________________
ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50 |
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| DIY - Does any know how to replace the IPDM Controller Unit? | itsEz | DIY Section (Do-It-Yourself) | 10 | 07-26-2021 09:57 AM |
| IPDM-ER (Fusebox next to battery) Removal ? | MagmaRed370z | Engine & Drivetrain | 6 | 02-19-2016 08:24 PM |
| Stalling when coasting and ipdm | rippedforce85 | Forced Induction | 7 | 03-15-2015 10:49 PM |
| Tsb: 2007-2009 all nissan models; ipdm service | AK370Z | 370Z Technical Service Bulletins (TSB) / Recalls | 0 | 02-08-2010 10:03 PM |
9Likes
Threaded Mode
