Meter Signal Delay

Tractionless · 02-01-2020, 07:42 AM

STrange my Prosport model turns on white and stays white until I use the button to change to amber. Not doing anything on its own.

Optimiser · 02-01-2020, 10:21 PM

Quote:

Originally Posted by Tractionless

STrange my Prosport model turns on white and stays white until I use the button to change to amber. Not doing anything on its own.

turtle64b · 02-02-2020, 04:19 PM

Quote:

Originally Posted by Tractionless

STrange my Prosport model turns on white and stays white until I use the button to change to amber. Not doing anything on its own.

I'm running the Prosport Evo series, which doesn't have a button to switch colors. It has a signal wire driven from the ILLUM signal to the radio dependent on whether the lights were on or not.

I could wire in a switch in lieu of a delay circuit, but I would rather have it done automatically as designed.

The circuit built in the link to the Subi forum is the size of a penny and uses 4 total components on a small circuit board. Basically a 555 chip, two capacitors and a resistor.

Thank you guys for the inputs!

02-01-2020, 07:42 AM	#1 (permalink)
Tractionless A True Z Fanatic Join Date: Jan 2016 Location: Atlantic SE Posts: 1,361 Drives: '10 K23 ST 7AT Rep Power: 30527	STrange my Prosport model turns on white and stays white until I use the button to change to amber. Not doing anything on its own. Optimiser likes this. __________________ Toys Not Tots

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
triple meter mod	silencedeyes	Exterior & Interior	1	06-26-2015 10:30 PM
Gas Meter	Bad Boy	Nissan 370Z General Discussions	21	02-18-2015 09:28 AM
Converting balanced signal to unbalanced signal from Bose HU	sselemit	Audio & Video	6	08-16-2013 04:38 AM
Car Speed Signal Input and Reverse Gear Signal Input tap locations?	rdavidw	Audio & Video	11	09-11-2011 07:24 AM
7AT rev delay?	Vegitto-kun	Engine & Drivetrain	16	05-04-2010 05:17 PM