Camshaft ladder and cylinder heads

scroupious · 01-20-2020, 09:14 PM

Hello

Can camshaft ladders or cradles be exchanged between any cylinder head or do they have to be in sets?

I have to purchase used heads and most i see come with no camshafts or cradles/ladders. do the heads need to have them to work properly?

Hope this makes sense

Thank you

Spooler · 01-20-2020, 09:41 PM

Quote:

Originally Posted by scroupious

Hello

Can camshaft ladders or cradles be exchanged between any cylinder head or do they have to be in sets?

I have to purchase used heads and most i see come with no camshafts or cradles/ladders. do the heads need to have them to work properly?

Hope this makes sense

Thank you

Yes, as far as I know they do. Why do you need heads? The ladder bolts that bolt the ladder to the head need to stay in the same spot also.

scroupious · 01-21-2020, 07:42 AM

I need to replace my heads due to excessive wear on the camshaft surfaces. One of them was really bad. I just bought the car used so not sure what happened, if they ran it low on oil or did not change the oil. Everything else looks good. I am installing JWT C2 cams also so I wanted to make sure everything was good.

So the cradles/ladders are interchangeable?

Thanks for the help!!

Spooler · 01-21-2020, 09:02 AM

No, they are not interchangeable. I look at my post above. Oops, it wasn't clear.

scroupious · 01-21-2020, 09:43 AM

Great! Thanks again. I didn’t think so, I figured the housings would not match up.

01-20-2020, 09:14 PM	#1 (permalink)
scroupious Base Member Join Date: Aug 2019 Location: IOWA Posts: 27 Drives: 2009 370Z Rep Power: 7	Camshaft ladder and cylinder heads Hello Can camshaft ladders or cradles be exchanged between any cylinder head or do they have to be in sets? I have to purchase used heads and most i see come with no camshafts or cradles/ladders. do the heads need to have them to work properly? Hope this makes sense Thank you

01-21-2020, 09:02 AM	#4 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 14,153 Drives: 2013 Nismo 370z Rep Power: 2684394	No, they are not interchangeable. I look at my post above. Oops, it wasn't clear. scroupious likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Vhr cylinder heads!!!	Elmo370z	Parts for sale (Private Classifieds)	60	12-14-2018 04:13 PM
Cylinder heads	Elmo370z	Engine & Drivetrain	7	07-19-2018 01:46 AM
[FOR SALE] Cylinder heads	Elmo370z	Parts for sale (Private Classifieds)	22	06-21-2018 01:18 PM
cylinder heads	lightw8 370z	Engine & Drivetrain	3	06-19-2017 10:55 PM
cylinder heads	avery370z	Intake/Exhaust	7	12-09-2014 06:23 PM

01-21-2020, 07:42 AM	#3 (permalink)
scroupious Base Member Join Date: Aug 2019 Location: IOWA Posts: 27 Drives: 2009 370Z Rep Power: 7	I need to replace my heads due to excessive wear on the camshaft surfaces. One of them was really bad. I just bought the car used so not sure what happened, if they ran it low on oil or did not change the oil. Everything else looks good. I am installing JWT C2 cams also so I wanted to make sure everything was good. So the cradles/ladders are interchangeable? Thanks for the help!!

01-21-2020, 09:43 AM	#5 (permalink)
scroupious Base Member Join Date: Aug 2019 Location: IOWA Posts: 27 Drives: 2009 370Z Rep Power: 7	Great! Thanks again. I didn’t think so, I figured the housings would not match up.