Z1 Tranny Mount Vibration

justin_boy · 02-23-2020, 01:57 AM

Hey Guys
Just had my FI Oil Cooler and Coolerworx Shifter along installed along with the Z! Urethane Tranny mount. At about 1 ~ 1.5k rpm there is a very noticable vibration. Place I got it installed said its the Tranny Mount which is what I guessed.

is this what it is? or should I be worried?

BTW the oil cooler is nuts! Just went for a nice 25 ~ 30 mile drive didnt go over 190 ish

definite recommendation for anyone whos not running one....i got the 34 row

madwi · 02-23-2020, 04:05 AM

Vibrations are normal. No need for concern.

justin_boy · 02-23-2020, 12:37 PM

cool, i dont mind it, just wondering if its normal. It literally feels like a nascar after getting this thing installed

it sucks the coolerworx shifter is so ugly cause it fits in my hand and shifts perfectly

im thinking of running a billetworks tall tear drop, have you heard of those?

redondoaveb · 02-23-2020, 12:41 PM

Quote:

Originally Posted by justin_boy

cool, i dont mind it, just wondering if its normal. It literally feels like a nascar after getting this thing installed

it sucks the coolerworx shifter is so ugly cause it fits in my hand and shifts perfectly

im thinking of running a billetworks tall tear drop, have you heard of those?

Check out Raceseng for shift knobs.

SouthArk370Z · 02-23-2020, 12:53 PM

NVH is going to increase when you switch to a polyurethane mount. The more mounts you change, the greater the NVH will become.

If it gets worse, then you can start worrying.

justin_boy · 02-23-2020, 01:35 PM

haha how much worse

justin_boy · 02-23-2020, 01:36 PM

Quote:

Originally Posted by redondoaveb

Check out Raceseng for shift knobs.

they have pretty cool ones! i actually might have my tk re drilled, just looking for a good machiner

02-23-2020, 01:57 AM	#1 (permalink)
justin_boy Track Member Join Date: May 2015 Location: woodland hills Posts: 600 Drives: z34 Rep Power: 8369	Z1 Tranny Mount Vibration Hey Guys Just had my FI Oil Cooler and Coolerworx Shifter along installed along with the Z! Urethane Tranny mount. At about 1 ~ 1.5k rpm there is a very noticable vibration. Place I got it installed said its the Tranny Mount which is what I guessed. is this what it is? or should I be worried? BTW the oil cooler is nuts! Just went for a nice 25 ~ 30 mile drive didnt go over 190 ish definite recommendation for anyone whos not running one....i got the 34 row

02-23-2020, 04:05 AM	#2 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,410 Drives: Granma red Z Rep Power: 2684430	Vibrations are normal. No need for concern. Rusty likes this.

02-23-2020, 12:53 PM	#5 (permalink)
SouthArk370Z Premium Member Join Date: Nov 2010 Location: South Arkansas Posts: 8,435 Drives: 2014 Challenger Rep Power: 324199	NVH is going to increase when you switch to a polyurethane mount. The more mounts you change, the greater the NVH will become. If it gets worse, then you can start worrying. __________________ Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] 1 Tpms from 09, iphone proclip mount and Escort stealth cord and mirror mount	Danny3.7	Parts for sale (Private Classifieds)	5	12-02-2012 11:13 AM
06-08 350 nismo tranny vs 370 tranny	speedemon53	Engine & Drivetrain	9	07-25-2012 02:43 PM
Xoom Mount: Ram Mount Review.	AdobePhil	Exterior & Interior	14	02-02-2012 05:30 PM
Shifter Vibration/ Shift knob vibration	BlackCherryZ	Nissan 370Z General Discussions	31	01-16-2010 09:53 AM
Aftermarket Dash Mount "Xentris Mount"	37009	Audio & Video	1	11-03-2009 03:12 PM

02-23-2020, 12:37 PM	#3 (permalink)
justin_boy Track Member Join Date: May 2015 Location: woodland hills Posts: 600 Drives: z34 Rep Power: 8369	cool, i dont mind it, just wondering if its normal. It literally feels like a nascar after getting this thing installed it sucks the coolerworx shifter is so ugly cause it fits in my hand and shifts perfectly im thinking of running a billetworks tall tear drop, have you heard of those?

02-23-2020, 01:35 PM	#6 (permalink)
justin_boy Track Member Join Date: May 2015 Location: woodland hills Posts: 600 Drives: z34 Rep Power: 8369	haha how much worse