My Z starts to leak some sort of blue ish liquid. Please help

zcarspirit

my is 2014. and i did not fill any coolant to the car....

Spartan 1771

From what I can tell, the overflow was redesigned in 2013, so you have the latest system. Unfortunately I dont know if this system is designed to bleed off excess coolant. I'm sure someone else in here can answer this.

__________________
~Rob

-DD Air Guide, Stillen G3 CAIs, 63mm Throttle Bodies, Motordyne M370, Berk HFCs, FI TDX CBE (non-res, CF), Sprint booster v3, Ecutek Dyno Tuned, and the list goes on...

BettyZ

I have a '14 and have the same overflow hose running down the radiator fans and onto the tray.

That being said, this sounds like the shop didn't properly seal the threads on the sensor or properly clamp the hoses where they meet the adapter. If they installed the sensor in the heater hose, which seems to be the most likely location, you dont need a jack or jackstands. But get some anyways.

If I were you. Take another car to the shop. Explain to them in exquisite detail what happened, and why you think it happened. Tell them to pay for the tow, and to fix it. Tell them you want to see what theyve done to fix it before they put everything back together. You want pictures. You want a written warranty.

Sent from my SM-G955U using Tapatalk

__________________
'14 MB Nismo | Boost Lab 6870 1.32 AR 553 HP / 471 ft.-lbs.
Betty Mods